End of Transmission Tone (Roger Beep Tone)
Short press the SB1 button while turning ON the radio to enable/disable End of Transmission Tone.
Note: This setting is set to OFF by default
Keypad Beeps
Keypad Beeps can be enabled/disabled by short pressing SB2 button (until radio ‘chirps’) while turning ON the radio.
Keypad Lock/Unlock
You can lock the keypad to avoid accidentally changing your radio settings. Press and hold MENU for 4 seconds to lock the radio keypad. To unlock, press MENU for 4 seconds.
Note: The only buttons that cannot be locked using this feature are the PTT button and
Button A (if Call Tone feature has been |
| |||
| ||||
assigned). | GETTING STARTED | |||
|
|
| ||
|
|
| ||
MENU Options | ||||
| ||||
|
|
|
| |
To enter MENU, short press MENU button. The radio will take you to the next feature option. For each feature, you can navigate with the 
/ 
buttons. After selecting your desired settings, you can:
• press MENU to save and go to the next option,
• long press the PTT button to save and exit or
• turn OFF the radio to exit without saving changes.
When there is no activity for more than ten seconds, MENU mode will time out.
39 English