Motorola RDU2080 manual Programming Buttons, Editing Channel Alias Name

Page 52

 

PROGRAMMING BUTTONS

 

You can map any channel to either button B or

 

C as a preset channel. To enable, enter

 

’Programming Mode’ and choose the channel

 

you want to set as preset channel using the /

 

 

 

buttons. Once you have selected your

 

channel, press and hold the B or C button for

 

PROGRAMMING FEATURES

2 – 3 seconds.

A short press of either preset button (B and C)

 

 

will play a good key chirp.

 

When scanning, a short press of either preset

 

button will change the home channel to the

 

preset channel. The radio will display FREQ/PL

 

and will continue to scan from the new home

 

channel.

 

EDITING CHANNEL ALIAS NAME

 

 

To edit a channel’s alias, turn ON the radio and

 

press and hold the PTT button and the

 

button for 3 seconds. Upon entering the

 

‘Channel Alias Mode’, the radio will generate a

 

special beep. You will see the current channel

English 50

alias name and channel number blinking as follows:

Choose the channel number you want to edit by pressing the / buttons. Once you have selected the channel number, press the PTT button or MENU to start editing the channel name. If you want to exit the Channel Aliasing Mode long press the PTT button.

A cursor will blink at the end of the channel name. Use button B to move the cursor to the left. If you're in the first character, the radio will give you a bonk tone. Whenever you press

Image 52
Contents RDX Series Two-Way Radios Page Contents Programming Features Getting StartedTroubleshooting Use and Care Frequency and Code Charts Power Supplies Safety Product Safety and RF Exposure ComplianceBatteries Chargers Safety Information Operational Safety Guidelines Package Contents IntroductionUSA Canada On your TTY Text Telephone FCC Licensing Information Interference InformationFCC Licensing Information Radio Overview Parts of the RadioOn/Off/Volume Knob Accessory ConnectorLED Indicator Model LabelLithium-Ion Li-Ion Battery Side ButtonsPush-to-Talk PTT Button Side Button 1 SB1Model Frequency Band AntennaBattery Features About the Li-Ion BatteryBattery Recycling and Disposal BatteryInstalling the Lithium-Ion Li-Ion Battery Removing the Lithium-Ion Li-Ion BatteryRemoving Alkaline Batteries Attaching and Removing Antenna Installing Spring Action Belt Clip ChargerBattery Life Information Li-Ion Battery Life with Battery Save feature onAlkaline Battery Life Alkaline Battery LifeBattery Meter RDX Series Battery MeterCharging the Battery Charging with the Drop-in Tray Single Unit Charger SUCCharging a Standalone Battery Charging a Standard BatteryCharging a High Capacity or Ultra High Capacity Battery Drop-in Tray Charger LED Indicators Standard Charger LED IndicatorRapid Charger LED Indicator Estimated Charging Time Charging Battery Type SolutionEstimated Charging Time MUC LED Indicator Adjusting Volume Getting StartedTurning Radio ON/OFF Reading the DisplayTalking and Monitoring Selecting a ChannelReceiving a Call Signal Strength Indicator and Channel Busy Indicators Talk RangeGetting Started Radio LED Indicators Radio Status LED IndicationWith Compatible VOX Accessories HANDS-FREE USE/VOXBattery Save Hands Free without Accessories iVOXReset to Factory Defaults End of Transmission Tone Roger Beep Tone Keypad BeepsKeypad Lock/Unlock Menu OptionsSetting VOX / iVOX sensitivity IVOBattery Type Menu LithiumProgramming Features Entering Programming ModeProgramming RX Reception Frequencies Programming RX Reception Codes CTCSS/DPL Programming ScrambleMA X CH Programming Maximum Number of ChannelsTone Programming Call TonesProgramming Microphone Accessory Gain Level Programming Microphone Gain LevelOther Programming Features ScanYES Programming Scan ListProgramming Buttons Editing Channel Alias NameEnglish Nuisance Channel Delete CPS Computer Programming SoftwarePower Select Time-Out TimerBandwidth Select Battery Type Setting Call TonesScramble Reverse BurstCloning with a Multi-Unit Charger MUC HeardOperating Instructions What to do if cloning fails Repeater Capabilities Cloning Radios using the CPS Computer Programming SoftwareProgramming Repeater Capability Programming Features Programming Features Troubleshooting Symptom Try ThisRange. Check for clear line of sight to improve transmission Troubleshooting VOX feature might be set to OFF USE and Care RDX VHF Frequencies Frequency and Code ChartsFrequency # Frequency # Bandwidth RDX VHF 8CH Radios Default Frequencies RDV2080d Channel Frequency # Code # BandwidthRDX UHF Frequencies Chart RDX UHF FrequenciesFrequency # Frequency Bandwidth MHz Frequency # Frequency and Code RDU2080d UHF Default Frequencies Chart RDX UHF 8 CH Radios Default Frequencies RDU2080dRDU4160d UHF Default Frequencies Chart RDX UHF 16 CH Radios Default Frequencies RDU4160dFrequency and Code Frequency and Code Ctcss and PL/DPL Codes Ctcss CodesPL/DPL Codes Code111 Frequency and Code Programming Customized Frequencies on 4W/5W RDX Models What Does this Warranty Cover? Motorola Limited Warranty for the United States and CanadaProducts and Accessories Warranty ExclusionsHOW to Obtain Warranty Service or Other INFORMATION? SoftwareWHO is COVERED? Software Copyright NoticePatent Notice Export LAW AssurancesAccessories Audio AccessoriesBattery AntennasCarry Accessories Power Supplies AC PIN AdaptorsSoftware Applications CablesPower Supplies Battery Save Battery TypeButtons Reset Display BacklightDisplay Call TonesChannel AliasingCloning Mode CPS ManagerLock End of TxIVOX, enable DisableDisplay Frequencies Direct InputLEDs Enabled Disabled Low BatterySensitivity LevelDisplay Microphone Gain LevelMonitor Nuisance ChPower Select Power up TextTalkaround Reset to DefaultsReverse Burst Timer Display ScanScan List Scan, AutoVOX, enable VOXProgrammable Buttons Chart Icons Chart Strength Repeater SignalVox/IVox Page NNTN8303A