button B and the cursor is positioned in a valid character, the button B will delete the current character and replace it with a blank space.
•Use the 
/ 
buttons to change the current selected character to the next ASCII value in alphabetical order (from A to Z). The characters will be uppercase letters.
•To toggle character between uppercase and lower case, press the A button. Note that the supported lower case characters are: b, c, d, g, h, i, l, o, r, u.
•Pressing the C button will allow you to insert special characters and numbers in the following order: 0 - 9 * {}? &%. + / - _ ' ' \. Character ' ' is a space character.
•Long press the PTT button to save and go back to the ‘Channel Aliasing Selection Mode’ to choose other channel to edit the alias name or exit without saving changes by turning OFF the radio.
Notes:
• If the channel alias name is left blank, the radio will play a bad key chirp and will stay in the editing menu mode until the channel name is edited and saved.
• When editing the channel alias name, if the radio is left idle after 3 seconds, the radio will accept the existing character and advance the
cursor one space to the right. FEATURESPROGRAMMING