Motorola RDU2080 manual Battery Type Setting, Call Tones, Scramble, Reverse Burst, Cloning Radios

PROGRAMMING FEATURES

Note: Some frequencies may have FCC transmit power restrictions that don't allow them to be set at a higher power level. For details see the Frequencies and Code Chart Section.

Battery Type Setting

The RDX™ series radio can be powered by either Alkaline, Lithium-Ion cells or battery pack. The battery pack can be detected at power-up and the corresponding battery level will be shown on the radio's display.

Call Tones

See “Programming Call Tones” on page 46.

Scramble

See “Programming Scramble” on page 44.

Reverse Burst

Reverse Burst eliminates unwanted noise (squelch tail) during loss of carrier detection. You can select values of either 180/240.

Notes:

•The features described are just some of the features CPS has. There are many more capabilities that this software offers. For more information refer to the HELP file in the CPS

•Some of the features available with the CPS software may vary depending on the Radio Model.

CLONING RADIOS

You can clone RDX™ Series radio profiles from one radio (the ‘Source’ radio) to a second radio (the ‘Target’ radio) by using any one of these 3 methods:

•One Multi Unit Charger (optional accessory)

•Two Single Unit Chargers and a Radio-to- Radio cloning cable (optional accessory)

•the CPS (free software download)

English 54