Grandstream Networks DP710 manual DP715 Base Station Configuration Guide

Page 34

DP715 BASE STATION - CONFIGURATION GUIDE

CONFIGURING THE BASE STATION THROUGH VOICE PROMPTS

DHCP MODE

Select voice menu option 01 to enable DP715 to use DHCP.

STATIC IP MODE

Select voice menu option 01 to enable DP715 to use STATIC IP mode, then use option 02, 03, 04, 05 to set up IP address, Subnet Mask, Gateway and DNS server respectively.

FIRMWARE SERVER IP ADDRESS

Select voice menu option 13 to configure the IP address of the firmware server.

CONFIGURATION SERVER IP ADDRESS

Select voice menu option 14 to configure the IP address of the configuration server.

UPGRADE PROTOCOL

Select voice menu option 15 to choose firmware and configuration upgrade protocol. User can choose between TFTP and HTTP.

FIRMWARE UPGRADE MODE

Select voice menu option 17 to choose firmware upgrade mode among the following three options: 1) Always check, 2) check when pre/suffix changes, and 3) never upgrade.

CONFIGURING THE BASE STATION VIA WEB BROWSER

DP715 Base Station has an embedded Web server that will respond to HTTP GET/POST requests. It also has embedded HTML pages that allow users to configure the DP715 through a web browser such as Microsoft’s IE, AOL’s Netscape or Mozilla Firefox installed on Windows or Unix OS. (Macintosh OS is not included).

Access the Web Configuration Menu

1.Find the IP address of the Base Station using voice prompt menu option 02.

2.Open a web browser, type in the IP address. You will see the login page of the device.

Once the HTTP request is entered and sent from a web browser, the user will see a login screen. There are two default passwords for the login page:

User Level:

Password:

Web pages allowed:

End User Level

123

Only Status and Basic Settings

 

 

 

Administrator Level

admin

Browse all pages

 

 

 

The password is case sensitive with maximum length of 25 characters. The factory default password for End User and administrator is “123” and “admin” respectively. Only an administrator can access the “ADVANCED SETTINGS”, “HANDSET SETTINGS” and “PROFILE SETTINGS” configuration pages.

Firmware version 1.0.0.8

DP715/DP710 User Manual

Page 34 of 52

Page 33 Page 35
Image 34
Page 33 Page 35
Contents Grandstream Networks, Inc Index Software Upgrade DP715/DP710 U SER M Anual GNU GPL Information Change LOG Warranty Safety CompliancesWelcome Firmware version Equipment Packaging Connecting the DP715 Base StationConnect Your DP715/710 Equipment Packaging10/100Mbps RJ-45 port to connect to the network Advanced Definitions of the DP715 Leds PatternConnecting the DP710 Charger Unit Setting UP the DP715/710 HandsetDP715/DP710 Technical Specifications Software Features OverviewProduct Overview Hardware Specifications DP715/710 Hardware SpecificationsHandset Keys Description Using the DP715/710 HandsetGetting Familiar with the Handset Handset KeypadPage Battery Display Handset Display Structure LCDHandset Menu Structure Range IconHandset Menu Overview Display DefinitionCall History Handset Menu Description Turning the Handset ON/OFFConsult the Call History Delete all Calls PhonebookDeleting a Call Saving a New Entry in the PhonebookDelete an Entry or All Entries Display the Details of Phonebook EntriesSelecting the Menu Language ACTIVATE/DEACTIVATE HANDS-FREE ModeSetting the Loudspeaker Volume Muting the MicrophoneSetting the Ringer Volume on the Handset Setting the Ringer Melody on the HandsetEnable the Keypad Lock Setting the KEY LockAdjust the Display Contrast Disable the Keypad LockEdit Handset Name Setting AN AlarmSwitching the Alarm Off Time 24hr 0700Appointments Stop WatchUnderstanding DP715/710 Voice Prompt Basic OperationsDP715/710 IVR Menu Definitions Registering a Handset to the DP715 Base Station Device not registeredAnswering Calls Using the PhonebookCompleting Calls DialInternal Calls Using IVRUsing Star Code Direct IP CallsCall Transfer Call HoldCall Waiting Or Voice Prompt with option 47, then 192*168*0*160Attended Transfer WAY ConferencingInstructions for 3-way conference Call Features DP715/710 Call Feature DefinitionsConfiguring the Base Station Through Voice Prompts DP715 Base Station Configuration GuideConfiguring the Base Station VIA WEB Browser Dtmf Methods Important SettingsNAT Settings Preferred Vocoder CodecBasic Settings Status Advanced User Configuration Advanced SettingsPassword Config Server PathXML Config File Password Firmware File PrefixInternet Telephone Service Provider ACS URLProfile Settings Disable Bellcore Style Advance Configuration DNS ModeUnregister on Reboot Tel URIEnable Call Features SIP T1 TimeoutDisable Dtmf Header Ring TimeoutSubscribe for MWI Disable Call-WaitingCaller ID Disable Reminder Ring Send AnonymousForce Timer Caller Request TimerCallee Request Timer Enable 100relSaving the Configuration Changes Handsets SettingsRebooting the DP715 Base Station from Remote Configuring the DP715 Base Station Through a Central ServerSoftware Upgrade Firmware Upgrade Through TFTP/HTTP/HTTPSFirmware and Configuration File Prefix and Postfix Instructions for Local Firmware Upgrade Using Tftp ServerConfiguration File Download Instructions for Upload from Local DirectoryManaging Firmware and Configuration File Download Restore Factory Default Setting Base StationHandset
Related manuals
Manual 52 pages 7.92 Kb
Top Page Image Contents