a)xx+ - at least 2 digit numbers
b)xx. - only 2 digit numbers
c)^ - exclude
d)
e)[147] - any digit of 1, 4, or 7
f)<2=011> - replace digit 2 with 011 when dialing
g) - the OR operand
• Example 1: {[369]11 1617xxxxxxx}
Allow 311, 611, and 911 or any 10 digit numbers with leading digits 1617
• Example 2: {^1900x+ <=1617>xxxxxxx}
Block any number of leading digits 1900 or add prefix 1617 for any dialed 7 digit
numbers
•Example 3:
Allows any number with leading digit 1 followed by a 3 digit number, followed by any number between 2 and 9, followed by any 7 digit number OR Allows any length of numbers with leading digit 2, replacing the 2 with 011 when dialed.
|
|
|
| 3. Default: Outgoing – {x+} |
|
|
|
|
|
| Allow any length of numbers. |
|
|
|
|
|
| Example of a simple dial plan used in a Home/Office in the US: |
|
|
|
|
|
| { ^1900x. |
|
|
|
|
|
| Explanation of example rule (reading from left to right): |
|
|
|
|
|
| • ^1900x. - prevents dialing any number started with 1900 |
|
|
|
|
|
| • |
|
|
|
|
|
| 7 numbers and 1617 area code will be added automatically |
|
|
|
|
|
| • |
|
|
|
|
|
| length |
|
|
|
|
|
| • |
|
|
|
|
|
| • [3469]11 - allow dialing special and emergency numbers 311, 411, 611 and 911 |
|
|
|
|
|
| Note: In some cases where the user wishes to dial strings such as *123 to activate voice |
|
|
|
|
|
| mail or other applications provided by their service provider, the * should be predefined |
|
|
|
|
|
| inside the dial plan feature. An example dial plan will be: { *x+ } which allows the user to |
|
|
|
|
|
| dial * followed by any length of numbers. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| SUBSCRIBE for MWI |
|
| Default is “No”. When set to “Yes” a SUBSCRIBE for Message Waiting Indication will be |
|
|
|
|
|
| sent periodically. |
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
| Send Anonymous |
|
| If this parameter is set to “Yes”, the “From” header in outgoing INVITE message will be set |
|
|
|
|
|
| to anonymous, essentially blocking the Caller ID from displaying. |
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
| Disable |
|
| Default is No. If set to YES Call Waiting indication information will not be provided to |
|
|
|
|
|
| Handset. |
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
| Disable |
|
| Default is No. If set to YES Call Waiting caller ID will not be provided to the handset. |
|
|
| Caller ID |
|
|
|
|
|
|
|
|
|
| ||
| Disable Reminder Ring |
|
| Default is No. Play the reminder ring when this is set to Enable. |
|
|
| for |
|
|
|
|
|
|
|
|
|
| ||
| Anonymous Call |
|
| Default is “No”. If set to “Yes”, anonymous call will be rejected. |
|
|
| Rejection |
|
|
|
|
|
|
|
|
|
| ||
| Session Expiration |
|
| The SIP Session Timer extension enables SIP sessions to be periodically “refreshed” via |
|
|
|
|
|
| a SIP request (UPDATE, or |
|
|
|
|
|
| refresh via a UPDATE or |
|
|
|
|
|
|
|
|
|
Firmware version 1.0.0.8 | DP715/DP710 User Manual | Page 44 of 52 |