|
|
| Table 11: BASIC SETTINGS |
|
|
|
|
|
|
|
|
| End User Password |
| Password to access the Web Configuration Menu. This field is case sensitive with a |
| |
|
|
| maximum length of 25 characters. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Web Port |
| By default, HTTP uses port 80. This field is for customizable web port. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Telnet Server |
| Default is set to YES. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| IP Address |
| There are two modes to operate the DP715: |
|
|
|
|
| DHCP mode: all the field values for the Static IP mode are not used (even though they |
| |
|
|
| are still saved in the Flash memory.) The DP715 acquires its IP address from the first |
| |
|
|
| DHCP server it discovers from the LAN it is connected. Using the PPPoE feature: set the |
| |
|
|
| PPPoE account settings. The DP715 will establish a PPPoE session if any of the PPPoE |
| |
|
|
| fields is set. |
|
|
|
|
| Static IP mode: configure the IP address, Subnet Mask, Default Router IP address, |
| |
|
|
| DNS Server 1 (primary), DNS Server 2 (secondary) fields. These fields are set to zero by |
| |
|
|
| default. |
|
|
|
|
|
|
|
|
|
|
|
|
| |
| DHCP hostname |
| Default is blank. This option specifies the name of the client. This field is optional but may |
| |
|
|
| be required by some Internet Service Providers. |
|
|
|
|
|
|
|
|
|
|
|
|
| |
| DHCP domain |
| Default is blank. This option specifies the domain name that client should use when |
| |
|
|
| resolving hostnames via the Domain Name System. |
|
|
|
|
|
|
|
|
|
|
|
|
| |
| DHCP vendor class ID |
| Default is DP7XX. Used by clients and servers to exchange |
| |
|
|
|
|
| |
|
|
|
|
| |
| PPPoE account ID |
| PPPoE username. Necessary if ISP requires you to use a PPPoE (Point to Point Protocol |
| |
|
|
| over Ethernet) connection. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| PPPoE password |
| PPPoE account password. |
|
|
|
|
|
|
| |
|
|
|
|
| |
| PPPoE Service Name |
| Default is blank. This field is optional. If your ISP uses a service name for the PPPoE |
| |
|
|
| connection, enter the service name here. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Preferred DNS server |
| The preferred DNS Server to be used |
|
|
|
|
|
|
| |
|
|
|
|
| |
| Time Zone |
| Controls how the date/time is displayed according to the specified time zone. |
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| The syntax is std offset dst [offset],start[/time],end[/time] |
|
| |
|
|
| Default is set to : MTZ+6MDT+5,M3.2.0,M11.1.0 |
|
|
|
|
| MTZ+6MDT+5, |
|
|
|
|
| Time zone with 6 hours offset with 1 hour ahead which is the US central time. It is positive |
| |
|
|
| (+) if the local time zone is west of the Prime Meridian and negative |
| |
|
|
| Prime Meridian (a.k.a: International or Greenwich Meridian) |
|
|
|
|
| M3.2.0,M11.1.0 |
|
|
|
|
| The 1st number indicates Month: 1,2,3,..,12 (for Jan, Feb, .., Dec) |
|
|
|
|
| The 2nd number indicates the nth iteration of the weekday: (1st Sunday, 3rd Tuesday etc) |
| |
|
|
| The 3rd number indicates Weekday: 0,1, 2, ..,6(for Sun, Mon, Tue, .., Sat) |
|
|
|
|
| Therefore, this example is the DST which starts from the second Sunday of March to the |
| |
|
|
| 1st Sunday of November. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Allow DHCP server to |
| Default No. Let the DHCP server handle the Time Zone |
|
|
| set Time Zone |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Language |
| Languages supported with voice prompt and web interface, except Spanish that it is only |
| |
|
|
| in IVR. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Firmware version 1.0.0.8 |
| DP715/DP710 User Manual | Page 36 of 52 |
| |