Grandstream Networks DP710 manual Saving the Configuration Changes, Handsets Settings

	Table 15: HANDSETS SETTINGS
Page All Handsets	This button will allow you to ring all the Handsets registered with the DP715 Base
	Station
Desubscribe All	This button is used to de-register all the handset previously registered with the DP715
Handsets	Base Station
Enable Subscription	This button will allow you to set the DP715 into subscription mode in order to register a
Mode	new Handset.
	Note: Subscription mode is automatically exited after 120 seconds.
Page Handset	Allow you to ring a specific Handset registered with the DP715 Base Station
Desubscribe Handset	This button is used to de-register the handset selected from the DP715 Base Station.
Enable Handset	When set to Yes the Handset will be able to receive/make calls.
Hunting Group	This feature enables the DP715 to register all existing Handsets with the same phone
	number. Each incoming call will be routed to the first available handset in Linear;
	Parallel or Shared line mode. User may configure all Handset as members of the same
	Hunting Group or it may configure different handset combinations for more than one
	Hunting Group. For example: Handset 1, 3 and 5 are members of the same Hunting
	Group, the rest of the Handsets may have separate numbers and may be reached
	independently. Any Handset, member of a Hunting Group that is not registered with a
	SIP account, will be able to place outbound calls using the SIP credentials of the
	primary Hunting Group Handset.
	For example: Handset 1, 2, and 3 are members of the same Hunting Group. Handset 1
	is registered with a SIP account. Handset 2, and 3 are not registered. Handset 2 and 3
	will be able to place outbound calls using the SIP account of Handset 1. Select
	appropriate value for Hunting Group feature. The original SIP account should be set to
	Active while the group members should be set to the port number of the Active
	Handset.
	Example configuration of a Hunting group:
	Handset #1: SIP UserID and Authenticate ID entered, Hunting group set to "Active"
	Handset #2: SIP UserID and Authenticate ID left blank, Hunting Group set to "1"
	Handset #3: SIP UserID and Authenticate ID left blank, Hunting Group set to "1"
	Handset #4: SIP UserID and Authenticate ID entered, Hunting group set to "None"
	Hunting Group 1 contains Handset 1, 2, 3. Handset 4 is registered but it is not added to
	the Hunting Group 1.
SIP User ID	User account information, provided by VoIP service provider (ITSP). Usually in the form
	of digit similar to phone number or actually a phone number.
Authenticate ID	SIP service subscriber’s Authenticate ID used for authentication. Can be identical to or
	different from SIP User ID.
Authenticate Password	SIP service subscriber’s account password.
Name	SIP service subscriber’s name for Caller ID display.
Profile ID	Select the corresponding Profile ID between Profile 1 and Profile 2.

SAVING THE CONFIGURATION CHANGES

Click the “Update” button in the Configuration page to save the changes to the DP715 configuration. The following screen confirms that the changes are saved. Reboot or power cycle the DP715 to make the changes take effect.

Firmware version 1.0.0.8 DP715/DP710 User Manual Page 46 of 52