Grandstream Networks DP710 manual Software Upgrade, Firmware Upgrade Through TFTP/HTTP/HTTPS

Page 48

SOFTWARE UPGRADE

Software upgrade can be done via either TFTP or HTTP or HTTPS. The corresponding configuration settings are in the ADVANCED SETTINGS configuration page.

FIRMWARE UPGRADE THROUGH TFTP/HTTP/HTTPS

To upgrade via TFTP or HTTP/HTTPS, the “Firmware Upgrade and Provisioning upgrade via” field needs to be set to TFTP HTTP or HTTPS, respectively. “Firmware Server Path” needs to be set to a valid URL of a TFTP or HTTP server, server name can be in either FQDN or IP address format. Here are examples of some valid URL.

e.g. firmware.mycompany.com:6688/Grandstream/1.0.0.8 e.g. firmware.grandstream.com

NOTES:

Firmware upgrade server in IP address format can be configured via IVR. Please refer to the CONFIGURATION GUIDE section for instructions. If the server is in FQDN format, it must be set via the web configuration interface.

Grandstream recommends end-user use the Grandstream HTTP server. Its address can be found at http://www.grandstream.com/support/firmware . Currently the HTTP firmware server FQDN is “firmware.grandstream.com”. For large companies, we recommend to maintain their own TFTP/ HTTP/HTTPS server for upgrade and provisioning procedures.

Once a “Firmware Server Path” is set, user needs to update the settings and reboot the device. If the configured firmware server is found and a new code image is available, the DP715 will attempt to retrieve the new image files by downloading them into the DP715’s SRAM. During this stage, the DP715’s LEDs will blink until the checking/downloading process is completed. Upon verification of checksum, the new code image will then be saved into the Flash. If TFTP/HTTP/HTTPS fails for any reason (e.g. TFTP/HTTP/HTTPS server is not responding, there are no code image files available for upgrade, or checksum test fails, etc), the DP715 will stop the TFTP/HTTP/HTTPS process and simply boot using the existing code image in the flash.

Firmware upgrade may take as long as 15 to 30 minutes over Internet, or just 5 minutes if it is performed on a LAN. It is recommended to conduct firmware upgrade in a controlled LAN environment if possible. For users who do not have a local firmware upgrade server, Grandstream provides a NAT-friendly TFTP server on the public Internet for firmware upgrade.

Grandstream’s latest firmware is available at http://www.grandstream.com/support/firmware .

Oversea users are strongly recommended to download the binary files and upgrade firmware locally in a controlled LAN environment.

Note: Alternatively, the user can upload the firmware single file from his/her computer using a local directory. For more instructions see below. Also the user can download a free TFTP or HTTP server and conduct local firmware upgrade. A free windows version TFTP server is available for download from

http://support.solarwinds.net/updates/New-customerFree.cfm.Our latest official release can be downloaded from http://www.grandstream.com/support/firmware .

Firmware version 1.0.0.8

DP715/DP710 User Manual

Page 48 of 52

Page 47 Page 49
Image 48
Page 47 Page 49
Contents Grandstream Networks, Inc Index Software Upgrade DP715/DP710 U SER M Anual GNU GPL Information Change LOG Safety Compliances WarrantyWelcome Firmware version Connecting the DP715 Base Station Connect Your DP715/710Equipment Packaging Equipment Packaging10/100Mbps RJ-45 port to connect to the network Advanced Definitions of the DP715 Leds PatternConnecting the DP710 Charger Unit Setting UP the DP715/710 HandsetSoftware Features Overview DP715/DP710 Technical SpecificationsProduct Overview Hardware Specifications DP715/710 Hardware SpecificationsUsing the DP715/710 Handset Getting Familiar with the HandsetHandset Keys Description Handset KeypadPage Battery Display Handset Display Structure LCDHandset Menu Structure Range IconHandset Menu Overview Display DefinitionHandset Menu Description Turning the Handset ON/OFF Call HistoryConsult the Call History Phonebook Deleting a CallDelete all Calls Saving a New Entry in the PhonebookDelete an Entry or All Entries Display the Details of Phonebook EntriesACTIVATE/DEACTIVATE HANDS-FREE Mode Setting the Loudspeaker VolumeSelecting the Menu Language Muting the MicrophoneSetting the Ringer Volume on the Handset Setting the Ringer Melody on the HandsetSetting the KEY Lock Adjust the Display ContrastEnable the Keypad Lock Disable the Keypad LockSetting AN Alarm Switching the Alarm OffEdit Handset Name Time 24hr 0700Appointments Stop WatchBasic Operations Understanding DP715/710 Voice PromptDP715/710 IVR Menu Definitions Registering a Handset to the DP715 Base Station Device not registeredUsing the Phonebook Completing CallsAnswering Calls DialUsing IVR Using Star CodeInternal Calls Direct IP CallsCall Hold Call WaitingCall Transfer Or Voice Prompt with option 47, then 192*168*0*160WAY Conferencing Attended TransferInstructions for 3-way conference Call Features DP715/710 Call Feature DefinitionsDP715 Base Station Configuration Guide Configuring the Base Station Through Voice PromptsConfiguring the Base Station VIA WEB Browser Important Settings NAT SettingsDtmf Methods Preferred Vocoder CodecBasic Settings Status Advanced User Configuration Advanced SettingsConfig Server Path XML Config FilePassword Password Firmware File PrefixInternet Telephone Service Provider ACS URLProfile Settings Advance Configuration DNS Mode Unregister on RebootDisable Bellcore Style Tel URISIP T1 Timeout Disable DtmfEnable Call Features Header Ring TimeoutDisable Call-Waiting Caller ID Disable Reminder RingSubscribe for MWI Send AnonymousCaller Request Timer Callee Request TimerForce Timer Enable 100relSaving the Configuration Changes Handsets SettingsRebooting the DP715 Base Station from Remote Configuring the DP715 Base Station Through a Central ServerSoftware Upgrade Firmware Upgrade Through TFTP/HTTP/HTTPSInstructions for Local Firmware Upgrade Using Tftp Server Configuration File DownloadFirmware and Configuration File Prefix and Postfix Instructions for Upload from Local DirectoryManaging Firmware and Configuration File Download Restore Factory Default Setting Base StationHandset
Related manuals
Manual 52 pages 7.92 Kb
Top Page Image Contents