Table 10: Device Configuration - Status
| MAC Address |
|
|
|
| The device ID, in HEXADECIMAL format. | |
|
|
|
|
|
|
|
|
| IP Address |
|
|
|
| This field shows IP address of GXP1100/1105. | |
|
|
|
|
|
|
|
|
| Product Model |
|
|
|
| This field contains the product model information. | |
|
|
|
|
|
|
|
|
| Part Number |
|
|
|
| This field contains the product part number. | |
|
|
|
|
|
|
|
|
| Software Version |
|
|
|
| • Program: This is the main firmware release number, which is always used for | |
|
|
| identifying the software (or firmware) system of the phone. |
|
|
| • Boot: Booting code version number |
|
|
| • Core: Core code version number |
|
|
| • Base: Base code version number |
|
|
| • DSP: DSP code version number |
|
|
| • Aux: Aux code version number |
|
|
|
|
|
|
|
|
| System Up Time |
|
|
|
| This field shows system up time since the last reboot. | |
|
|
|
|
|
|
|
|
| System Time |
|
|
|
| This field shows the current time on the phone system. | |
|
|
|
|
|
|
|
|
| Registered |
|
|
|
| Indicates whether accounts are registered to the related SIP server. | |
|
|
|
|
|
|
|
|
|
|
|
|
| PPPoE Link Up |
|
|
|
| Indicates whether the PPPoE connection is enabled (connected to a modem). | |
|
|
|
|
|
|
|
|
|
|
|
|
| Service Status |
|
|
|
| • GUI: shows the GUI status - running or stopped | |
|
|
| • Phone: shows the phone status - running or stopped |
|
|
|
|
|
|
|
|
| Core Dump |
|
|
|
| Download core dump file for troubleshooting when necessary. | |
|
|
|
|
|
|
|
|
Table 11: Device Configuration – Settings/Basic Settings
End User Password
IP Address
This contains the password to access the Web Configuration Menu. This field is case sensitive with a maximum length of 25 characters.
The GXP1100/1105 operates in two modes:
1.DHCP mode: all the field values for the Static IP mode are not used (even though they are still saved in the Flash memory.) The GXP1100/1105 acquires its IP address from the first DHCP server it discovers on its LAN. The DHCP option is reserved for NAT router mode. To use the PPPoE feature, set the PPPoE account settings. The GXP1100/1105 establishes a PPPoE session if any of the PPPoE fields is set.
2.PPPoE mode: configure all of the following fields: PPPoE account ID, PPPoE password and PPPoE service name.
3.Static IP mode: configure all of the following fields: IP address, Subnet Mask, Default Router IP address, DNS Server 1 (primary), DNS Server 2 (secondary). These fields are set to zero by default.
Grandstream Networks, Inc. | GXP1100/1105 User Manual | Page 14 of 29 |
| Firmware version: 1.0.1.80 | Last Updated: 07/2011 |