|
| This parameter specifies how often the GXP1100/1105 sends a blank UDP packet |
|
| to the SIP server in order to keep the “hole” on the NAT open. Default is 20 |
|
| seconds. |
|
|
|
|
|
|
| Use NAT IP | NAT IP address used in SIP/SDP message. Default is blank. |
|
|
|
|
|
|
| STUN Server | IP address or Domain name of the STUN server. STUN resolution result will display |
|
| in the STATUS page of the Web UI. |
|
|
|
|
|
|
| Firmware Upgrade and | Allows the user to select the following options for firmware upgrade: |
| Provisioning | • Always Check for New Firmware |
|
| • Check New Firmware only when F/W pre/suffix changes |
|
| • Always Skip the Firmware Check. |
|
| Firmware upgrade may take up to 10 minutes depending on network environment. |
|
| Do not interrupt the firmware upgrading process. |
|
| Note: Grandstream strongly recommends that the user upgrade firmware |
|
| locally in a LAN environment if using TFTP to upgrade. Please DO NOT |
|
| interrupt the upgrade process (especially the power supply) as this will |
|
| damage the device. |
|
|
|
|
|
|
| XML Config File | The password used for encrypting the XML configuration file using OpenSSL. This |
| Password | is required for the phone to decrypt the encrypted XML configuration file. |
|
|
|
|
|
|
| HTTP/HTTPS User Name | The user name for the HTTP/HTTPS server. |
|
|
|
|
|
|
|
|
|
| HTTP/HTTPS Password | The password for the HTTP/HTTPS server. |
|
|
|
|
|
|
|
|
|
| Upgrade Via | This field allows the user to choose the firmware upgrade method: TFTP, HTTP or |
|
| HTTPS. |
|
|
|
|
|
|
| Firmware Server Path | Defines the server path for the firmware server. It can be different from the |
|
| Configuration server which is used for provisioning. |
|
|
|
|
|
|
| Config Server Path | Defines the server path for provisioning; it can be different from the firmware server. |
|
|
|
|
|
|
| Firmware File | Default is blank. If configured, GXP1100/1105 will request the firmware file with the |
| Prefix/Postfix | prefix/postfix and only the firmware with the matching encrypted prefix will be |
|
| downloaded and flashed into the phone. |
|
| This setting is useful for ITSPs. End user should keep it blank. |
|
|
|
|
|
|
| Config File | Default is blank. If configured, GXP1100/1105 will request the config file with the |
| Prefix/Postfix | prefix/postfix and only the file with the matching encrypted prefix will be downloaded |
|
| and flashed into the phone. |
|
| This setting is useful for ITSPs. End user should keep it blank. |
|
|
|
|
|
|
| Allow DHCP Option 43 | Default is “Yes”. This allows device gets provisioned from the server automatically. |
| and Option 66 to |
|
| override server |
|
|
|
|
Grandstream Networks, Inc. | GXP1100/1105 User Manual | Page 16 of 29 |
| Firmware version: 1.0.1.80 | Last Updated: 07/2011 |