| Automatic Upgrade | This function is used by ITSP. End user should NOT touch these parameters. |
|
| Default is “No”. Choose “Yes” to enable automatic HTTP upgrade and provisioning. |
|
| In “Check for upgrade every” field, enter the number of minutes to check the HTTP |
|
| server for firmware upgrade or configuration changes. When set to “No”, the phone |
|
| will only perform HTTP upgrade and configuration check once at boot up. |
|
|
|
|
|
|
| Authenticate Conf File | Default is “No”. If set to “Yes”, configuration file would be authenticated before |
|
| acceptance. End user should use default setting. |
|
|
|
|
|
|
| Enable | Default is “No”. |
|
|
|
|
|
|
| ACS URL | URL for |
|
|
|
|
|
|
|
| Enter username for |
|
|
|
|
|
|
|
| Enter password for |
|
|
|
|
|
|
| Periodic Inform Enable | Enable periodic inform. Default is “No”. |
|
|
|
|
|
|
| Periodic Inform Interval | When enabling periodic inform, set up the periodic inform interval. |
|
|
|
|
|
|
| Connection Request | Enter the connection request username. |
| Username |
|
|
|
|
|
|
|
| Connection Request | Enter the connection request password. |
| Password |
|
|
|
|
|
|
|
| Authentication Method | Select the authentication method among “No authentication”, “Basic” or Digest. |
|
|
|
|
|
|
| Connection Request | Enter the connection request port. |
| Port |
|
|
|
|
|
|
|
| Offhook Auto Dial | To configure a User ID/extension to dial automatically when the phone is taken |
|
| offhook. |
|
|
|
|
|
|
| Syslog Server | The IP address or URL of System log server. This feature is especially useful for |
|
| ITSPs. |
|
|
|
Grandstream Networks, Inc. | GXP1100/1105 User Manual | Page 17 of 29 |
| Firmware version: 1.0.1.80 | Last Updated: 07/2011 |