Grandstream Networks GXP1100/1105 guide

Dial Plan

Delayed Call Forward Wait Time

Enable Call Features

Call Log

Dial Plan Rules:

1.Accepted Digits: 1,2,3,4,5,6,7,8,9,0 , *, #, A,a,B,b,C,c,D,d

2.Grammar: x - any digit from 0-9;

a)xx+ - at least 2 digit numbers

b)xx. - only 2 digit numbers

c)^ - exclude

d)[3-5] - any digit of 3, 4, or 5

e)[147] - any digit of 1, 4, or 7

f)<2=011> - replace digit 2 with 011 when dialing

g) - the OR operand

• Example 1: {[369]11 1617xxxxxxx}

Allow 311, 611, and 911 or any 10 digit numbers with leading digits 1617

• Example 2: {^1900x+ <=1617>xxxxxxx}

Block any number of leading digits 1900 or add prefix 1617 for any dialed 7 digit numbers

• Example 3: {1xxx[2-9]xxxxxx <2=011>x+}

Allows any number with leading digit 1 followed by a 3 digit number, followed by any number between 2 and 9, followed by any 7 digit number OR Allows any length of numbers with leading digit 2, replacing the 2 with 011 when dialed.

3.Default: Outgoing – {x+}

Allow any length of numbers.

Example of a simple dial plan used in a Home/Office in the US:

{^1900x. <=1617>[2-9]xxxxxx 1[2-9]xx[2-9]xxxxxx 011[2-9]x. [3469]11 } Explanation of example rule (reading from left to right):

• ^1900x. - prevents dialing any number started with 1900

• <=1617>[2-9]xxxxxx - allows dialing to local area code (617) numbers by dialing 7 numbers and 1617 area code will be added automatically

• 1[2-9]xx[2-9]xxxxxx - allows dialing to any US/Canada Number with 11 digits length

• 011[2-9]x. - allows international calls starting with 011

• [3469]11 - allow dialing special and emergency numbers 311, 411, 611 and 911 Note: In some cases where the user wishes to dial strings such as *123 to activate voice mail or other applications provided by their service provider, the * should be predefined inside the dial plan feature. An example dial plan will be: { *x+ } which allows the user to dial * followed by any length of numbers.

Time waited before the call is forward to a number or VM.

Default is 20 seconds.

Default is “Yes”. If set to “No”, Call transfer, Call Forwarding are supported locally provided ITSP support those features. In addition, “ForwardAll” softkey will be hidden if call feature code is disabled for Account 1.

User can choose to disable Call Log and what kind of calls to log.

Grandstream Networks, Inc.	GXP1100/1105 User Manual	Page 23 of 29
	Firmware version: 1.0.1.80	Last Updated: 07/2011

Firmware version: 1.0.1.80

Last Updated: 07/2011