Grandstream Networks GXP1100/1105 manual ILBC Frame Size ILBC Payload Type Special Feature

Page 27

iLBC Frame Size

iLBC Payload Type

Special Feature

iLBC packet frame size. Default is 20ms. For Asterisk PBX, 30ms might be required.

Payload type for iLBC. Default value is 97. The valid range is between 96 and 127.

Default is Standard. Choose the selection to meet special requirements from Soft Switch vendors.

SAVING THE CONFIGURATION CHANGES

After the user makes a change to the configuration, press the “Update” button in the Configuration Menu. We recommend rebooting or powering cycle the IP phone after saving changes.

REBOOTING THE PHONE REMOTELY

Press the “Reboot” button at the bottom of the configuration menu to reboot the phone remotely. The indicator on the top right corner will first turn orange and then red. Wait until the indicator is off. Then log in again.

Grandstream Networks, Inc.

GXP1100/1105 User Manual

Page 26 of 29

 

Firmware version: 1.0.1.80

Last Updated: 07/2011

Image 27
Contents Grandstream Networks, Inc Table of Contents GUI Interface Examples Welcome Installation GXP1100/1105 ConnectorsEquipment Packaging Product Overview GXP1100/1105 Feature GuideGXP1100/1105 Key Features in a Glance GXP1100/1105 Hardware SpecificationsGXP1100/1105 Technical Specifications Upgrades FirmwareSecurity GXP1100/1105 Keypad Buttons Using the GXP1100/1105Call Appearance with 1 SIP Account Completing CallsMaking Calls using IP Addresses Call Transfer Receiving CallsCall Waiting/Call Hold MuteGXP1100/1105 Call Features Voice Messages Message Waiting IndicatorGXP1100/1105 IVR Menu Definitions Configuration GuideDefinitions Access the Web Configuration MenuDevice Configuration Settings/Basic Settings Device Configuration StatusDevice Configuration Settings /Advanced Settings Upgrade Via Firmware UpgradeXML Config File HTTP/HTTPS PasswordTR-069 Password Automatic UpgradeAuthenticate Conf File Enable TR-069NTP server Password Distinctive Ring ToneSyslog Level Send SIP LogUse Quick IP Call Mode Disable Call WaitingDisable Call Waiting Tone Disable Direct IP CallsDisplay Language SIP Account SettingsSupport SIP Instance ID Name DNS Mode Primary IP Backup IPSIP Registration Unregister on Reboot Register Expiration Local SIP PortFirmware version Last Updated 07/2011 Firmware version Last Updated 07/2011 Firmware version Last Updated 07/2011 Firmware version Last Updated 07/2011 ILBC Frame Size ILBC Payload Type Special Feature No Local TFTP/HTTP Server Software Upgrade & CustomizationWeb Configuration Interface IVR MenuManaging Firmware and Configuration File Download Instructions for Local Tftp UpgradeInstructions for Restoration Restore Factory Default Setting