Casio 4610SW manual Reset Phone, Message, Mute, Speakerphone

Page 16

Reset Phone

To reset the IP phone:

Note: Restarting of the telephone may take a few minutes.

1.Press the Mute button.

2.Using the dial pad, press the following keys in sequence: 73738#

oThe display shows the message "Reset values? *=no #=yes".

3.If you want to reset the phone without resetting any assigned values, press * (asterisk).

oThe display prompts "Restart phone? *=no #=yes".

If you want to reset the phone and any previously assigned (programmed) values, press # (the pound key). Note: Use this option only if your phone has programmed, static values.

oThe display shows the message "Resetting values" while your conference phone resets its programmed values,

such as the IP address, to its default values, and re-establishes the connection to the server.

oThe display prompts "Restart phone? *=no #=yes".

4.If you want to restart the phone, press #.

5.If you want to terminate the restart and restore the phone to its previous state, press *.

Note: If the above reset procedure cannot be performed or does not solve the problem, and your System Administrator approves, the phone may be power cycled.

To power cycle the phone:

1.Unplug the phone then plug it back in.

oThe phone reconnects to the server and reinitializes everything. Note: It may take a few minutes before the phone can be used again.

Message

To retrieve a message:

1.See your system manager for instructions regarding your local message retrieval procedures.

Note: If the stutter dial tone (Audible Message Waiting) feature is not presently administered for your station, request that your system manager do the necessary administration.

Mute

To prevent the other person on the line from hearing you:

1.Press the Mute button.

oThe other party cannot hear you. The indicator next to the Mute button lights when Mute is active.

To reinstate two-way conversation:

1.Press the Mute button again.

oThe other party can hear you again.

oThe indicator next to the Mute button turns off.

Speakerphone

To place or answer a call without lifting the handset, or to use the Speakerphone with any feature:

1.Press the Speaker button.

oThe indicator next to the Speaker button lights and the speaker handles voice control. The first available call appearance line activates.

2.Place or answer the call.

or, Access the selected feature.

3.If needed, adjust the speaker volume by pressing the Volume Control () button until you reach the desired volume level.

oAs you press the Volume Control button, the top display area shows the volume level.

4610SW IP Telephone End User Guide 16 P a g e

Image 16
Contents Avaya 4610SW IP Telephone End User Guide Table of Contents About Your Telephone Telephone Diagram Navigating Application Screens Phone Application IP Telephony ApplicationsSpeed Dial Application Call Log Application Web Access ApplicationIP Telephone Options Call Appearances Entering Characters Using the DialpadEditing During or After Entry Conventions Used in the Procedure Descriptions Feature and FeatureName Entry Example ConventionsFeature Finder Hold Call Park TransferCall Pickup Conference Call Forwarding All CallsTo cancel Send All Calls Send All CallsCall Log To send all calls except priority calls to coveragePriority Calling To delete all entries from a call logTo delete a single call log entry To place a priority call Press PriorityReset Phone MessageMute SpeakerphoneSpeed Dial To dial a party using a Speed Dial button To add a call log entry to a speed dial buttonTo delete a Speed Dial button label RedialTo redial the last number called Ringing Tones Tones and Their MeaningsFeedback Tones Interpreting Display Icons Problem/Symptom Suggested SolutionIcon Troubleshooting IP Telephony Applications Problem/Symptom Suggested ResolutionGlossary AudixAccess Codes Feature Code