Using the Features Menu | Page 15 |
Enabling or disabling autoscroll
If autoscroll is enabled, the IP Phone automatically directs you to the screen for the active feature. For example, if your secondary Directory Number (DN) is configured on screen two, and you receive a call to that number, the feature screens scroll to page two. You can answer the call immediately without searching for the screen.
Step Action
1From the main menu, highlight the Feature menu and press Ok.
2 | Select a Feature and press OK. Highlight Assign and press Ok. | . |
3From the Assign menu, select AutoScroll. Press Ok.
4Perform one of these actions:
•To enable autoscroll, select Enable. (Recommended)
•To disable autoscroll, select Disable.
6Press Ok.
Labeling a feature key
Step Action
1From the main menu, open the Feature menu. Select a menu item.
2From the Feature menu, select and open Label.
3Press Clear to delete the current label if necessary.
4Use the dialpad to enter the new label.
5To correct the label, press Bkspc.
6When you have correctly entered the new label, press Ok.