17.Use LEFT ARROW or RIGHT ARROW to enable or disable DHCP Time.
18.Press SAVE softkey.
19.Press BACK softkey.
20.Press UP ARROW or DOWN ARROW to scroll to “1. Connection Mode.”
21.Press OK.
22.Use LEFT ARROW or RIGHT ARROW to select “DHCP.”
23.Press SAVE softkey.
24.Press BACK or EXIT 6 times to return to idle screen.
25.Disconnect and reconnect the power supply so the phone will reboot and apply the new settings.
3 Basic Functions
3.1Making a call
3.1.1Call Device
Calls can be made using three different devices:
1.Handset - Pick up the handset. The 
icon will be shown on the LCD screen.
2.Speakerphone - Press the Speaker button. The 
icon will be shown on the LCD screen.
3. Headset - Press the Headset button. The icon 
will be shown in the LCD screen.
The number may also be dialed first. Then the method of speaking can be chosen.
3.1.2Call Methods
Press an available line button then use one of the following methods to place a call.
1.Dial the desired number using the keypad.
2.Press the History softkey. Use the navigation buttons to highlight the number to call. Use the LEFT ARROW or RIGHT ARROW to choose Missed Calls, Incoming Calls and Outgoing Calls.
3.Press the REDIAL button to redial the last number called.
4.Press a programmable key which has been configured as a speed dial button.
5.Press the Dial softkey to make the call if necessary.
3.2Answering a call
If the phone is idle, lift the handset, press the Speaker button or Answer softkey to answer using the speaker phone, or press the headset button to answer using the headset.
If the phone is in use, press the answer softkey.
During the conversation, you can alternate between headset, Handset and Speaker phone by pressing the corresponding buttons or picking up the handset.
14