Cortelco C58P user manual

Auto Redial Times	Maximum number of auto redial attempts.
Auto Headset	Automatically answers call on headset.
Enable Intercom	If enabled, allows intercom calls.
Enable Intercom Tone	If enabled, plays intercom ring tone to alert to an intercom call.
P2P IP Prefix	Set Prefix for peer to peer IP call. For example: You wish to dial
	192.168.1.119. If the P2P IP Prefix is defined as 192.168.1., it is
	only necessary to dial #119. The default is “.”. If this box is left
	blank, IP dialing is disabled.
Turn Off Power Light	Disables Power Light if selected.
Emergency Call	The phone will dial the emergency call number even if the keyboard
Number	is locked.
Enable Password Dial	When a number is entered beginning with the password prefix, the
	following N numbers after the password prefix will be displayed as
	*. N is the value entered in the Password Length field.
	For example: If the password prefix is 3 and the Password Length is
	2, then dialing the number 34567 will display 3**67 on the phone.
Password Dial Prefix	Prefix for password dialing as described above.
Password Dial Length	Length for password dialing as described above.
Ban Outgoing	If enabled, no outgoing calls can be made.
Enable Call Waiting	If enabled, notifies user of a second call during a call. Caller ID of
	the new caller will be displayed. Press HOLD button to place
	existing call on hold and answer new call. Press HOLD again to
	return to first call.
Enable 3-way	If enabled, allows 3-way conference.
Conference
Accept Any Call	If enabled, the phone will accept a call even if the called number
	does not belong to the phone.
Enable Call	This is similar to Auto Redial except that the phone detects the state
Completion	of the called number before making a new call attempt.
Enable Pre-Dial	If this feature is enabled, digits dialed on-hook will be transmitted
	when the phone goes off-hook.
Enable Silent Mode	If enabled, the phone will not ring to indicate a new call. Instead,
	the light below the key pad will blink to indicate a new call.
Hide DTMF	This feature sets how DTMF digits are displayed after a call is in
	progress. For example, dialing a PIN code to access banking
	information. There are 4 choices.
	3. Disabled – All the digits will be shown on the LCD.
	4. All – None of the digits will be shown on the LCD. The “*”
	will be shown.
	5. Delay – The last digit entered will be shown for a short time and
	then replaced by “*.”
	6. Last Show – The last digit entered will be shown. Previous
	digits are replaced by “*.”
	54