Display Name | Set the display name. This name is shown on Caller ID. |
|
|
Enable Registration | Check to submit registration information. |
|
|
Domain Realm | SIP Domain if different than the SIP Registrar Server. |
|
|
Proxy Server Address | SIP proxy server IP address or URI(This is normally the same as |
| the SIP Registrar Server) |
|
|
Proxy Server Port | SIP Proxy server port. Normally 5060. |
|
|
Proxy User | SIP Proxy server account. |
|
|
Proxy Password | SIP Proxy server password. |
|
|
Backup Server Address | Backup SIP Server Address or URI (This server will be used if the |
| primary server is unavailable) |
|
|
Backup Server Port | Backup SIP Server Port |
|
|
Server Name | Name of SIP Backup server |
|
|
| Codecs Settings |
Click on the desired codec to select it. Then use the Left/Right arrow keys to move to the Enabled or Disabled List. Use the Up/Down arrow to change the priority of enabled codecs.
| Advanced SIP Settings |
|
|
Forward Type | There are 3 call forwarding modes plus Disabled. |
| Disabled:No call forwarding – Default mode |
| Busy:If the phone is busy, incoming calls will be forwarded. |
| No answer:If there is no answer, incoming calls will be forwarded |
| after a specified time. |
| Always:All incoming calls will be forwarded. |
|
|
Forward Number | Number to which calls are to be forwarded. |
|
|
No Ans. Fwd Wait Time | Used in conjunction with Call Forward No Answer. Wait time in |
| seconds before call is forwarded. |
|
|
Transfer Timeout | Time interval between sending “bye” message and hanging up |
| after the phone transfers a call. |
|
|
Enable Hotline | Activate Hot Line feature. Automatically call a number by going |
| off hook. |
|
|
Hotline Number | Number to be called in Hot Line Mode. |
|
|
Warm Line Wait Time | Used in Hot Line Mode. Time the phone waits after off hook |
| before dialing the hot line number. |
|
|
SIP Encryption | Enable/Disable SIP Encryption. |
|
|
SIP Encryption Key | SIP Encryption key. |
|
|
RTP Encryption | Enable/Disable RTP Encryption. |
|
|
RTP Encryption Key | RTP encryption key |
|
|
Enable Auto Answer | Activate Auto Answer mode. If activated, phone will |
| automatically answer an incoming call. |
|
|
Auto Answer Timeout | Used in conjunction with Auto Answer. The phone will answer |
| an incoming call after the Auto Answer Timeout |
|
|
Enable Session Timer | If enabled, this will refresh the SIP session timer per RFC4028. |
|
|
Session Timeout | Refresh interval if Session Timer is enabled. |
|
|
| 43 |