Cortelco C58P user manual Dial Peer Examples, Web Interface Explanation Example

Field Name		Explanation
Phone number	There are two types of matching: Full Matching or Prefix Matching.
	In Full matching, the entire phone number is entered and then
	mapped per the Dial Peer rules.
	In prefix matching, only part of the number is entered followed by
	T. The mapping with then take place whenever these digits are
	dialed. Prefix mode supports a maximum of 30 digits.
Destination	Set Destination address. This is optional. For a peer to peer call,
	enter the destination IP address or domain name. To use a dial rule
	on the SIP2 line, enter 0.0.0.2. For SIP3 enter 0.0.0.3
Port	Set the Signaling port, the default is 5060.
Alias	Set the Alias. This is the text to be added, replaced, or deleted. It is
	optional.
Note: There are four types of aliases.
1) Add: xxx – xxx will be dialed before any phone number.
2) All: xxx – xxx will replace the phone number.
3) Del: The characters will be deleted from the phone number.
4) Rep: xxx – xxx will be substituted for the specified characters.
Call Mode	Select either SIP or IAX2 protocol.
Suffix	Characters to be added at the end of the phone number. This is
	optional.
Delete Length	Sets the number of characters to be deleted. For example, if this is
	set to 3, the phone will delete the first 3 digits of the phone number.
	This is optional.
	Dial Peer Examples
Web Interface		Explanation	Example
		Set phone number,	Dial “93333”
		Destination, Alias and Delete	The SIP2 server will
		Length.	receive “3333”
		Phone number is XXXT;
		Destination is 255.255.255.255
		(0.0.0.2) and Alias is del.
		Any phone number that begins
		with XXX will be sent via
		SIP2 after the first several
		digits are deleted depending on
		the delete length.
		This creates a speed dial	Dial “2”
		function. Dialing “2”, will	The SIP1 server will
		cause the entire alias number	receive 33334444
		to be sent out.

50