Encryption Key |
|
|
|
Save Autoprovision | Save the Autoprovision username and password in the phone until |
Information | the server url changes |
|
|
DHCP Option Settings
Field Name
Explanation
DHCP Option Setting | The phone supports configuration from Option 43, Option 66, or a |
| Custom DHCP option. It may also be disabled. |
|
|
Custom DHCP Option | Custom option number. Must be from 128 to 254. |
|
|
| Plug and Play Settings |
|
|
Enable PnP | If this is enabled, the phone will send SIP SUBSCRIBE messages to |
| a multicast address when it boots up. Any SIP server understanding |
| that message will reply with a SIP NOTIFY message containing the |
| Auto Provisioning Server URL where the phones can request their |
| configuration. |
|
|
PnP Server | PnP Server Address |
|
|
PnP Port | PnP Server Port |
|
|
PnP Transport | PnP Transfer protocol – UDP or TCP |
|
|
PnP Interval | Interval time for querying PnP server. Default is 1 hour. |
|
|
Phone Flash Settings
Server Address | Set FTP/TFTP/HTTP server IP address for auto update. The address | ||
| can be an IP address or Domain name with subdirectory. | ||
|
| ||
Protocol Type | Specify the Protocol type FTP, TFTP or HTTP. | ||
|
|
| |
Config File Name | Specify configuration file name. | The phone will use its MAC ID | |
| as the config file name if this is blank. | ||
|
|
| |
Update Interval | Specify the update interval time. | Default is 1 hour. | |
|
|
|
|
Update Mode | 1. | Disable – no update |
|
| 2. | Update after reboot – update only after reboot. | |
|
|
|
|
|
| 64 |
|