Cisco Systems WIP300 manual Application Start and End Protocol IP Address Enable

Page 61

Wireless-G IP Phone

If you have a Linksys router, then follow these instructions:

1.On one of your networked computers, open your web browser.

2.Access the Router’s Web-based Utility by going to http://192.168.1.1 or the IP address of the Router.

3.A login screen will appear. Leave the User Name field blank. Enter the Router’s password (the default is admin) in the Password field. Then click the OK button.

4.Click the Applications & Gaming tab, and then click the Port Range Forwarding tab.

5.For each port range you must specify, enter a different name in the Application field. Then enter the number or range of external port(s) used by the IP Phone.

6.Select the protocol you will be using, UDP.

7.Enter the IP address of the IP Phone. For example, if the IP Phone’s IP address is 192.168.1.100, you would enter 100 in the field provided.

8.Repeat steps 5-7 until you have entered all four port ranges for the IP Phone.

Application	Start and End	Protocol	IP Address	Enable

Internet phone 1	5060 to 5061	UDP	(IP address of IP Phone)	X

Internet phone 2	53 to 53	UDP	(IP address of IP Phone)	X

Internet phone 3	69 to 69	UDP	(IP address of IP Phone)	X

Internet phone 4	10000 to 20000	UDP	(IP address of IP Phone)	X

9.Check the Enable option for the port services you want to use.

10.When you have completed the configuration, click the Save Settings button.

52	Appendix A: Troubleshooting
	Common Problems and Solutions

Image 61

Contents Wireless- G Page Copyright and Trademarks Table of Contents Appendix a Troubleshooting Wireless-G IP Phone Bottom Panel List of Figures15 Forwarding 67 Enter Register Proxy IP Welcome IntroductionWhat’s in This User Guide? Introduction What’s in This User Guide? Wireless-G IP Phone Bottom Panel Getting to Know the Wireless-G IP PhoneNavigation Button Front PanelSide Panel Back Panel Overview Installing and Using the Wireless-G IP PhoneCharging the IP Phone’s Battery Setting up the Wireless-G IP Phone Wireless-G IP Phone Wireless-G IP Phone Wireless-G IP Phone Wireless-G IP Phone Wireless-G IP Phone Wireless-G IP Phone Wireless-G IP Phone Wireless-G IP Phone Wireless-G IP Phone Wireless-G IP Phone Using the Wireless-G IP Phone Home Screen Configuring the Wireless-G IP Phone Wireless-G IP PhonePhonebook Main MenuCall Log Mail Configuring Your AccountOption Description Write New Using the E-mail ClientOption Description Draft Speed DialNetwork Profile ProfileEditing a Network Profile Settings Following optionsSIP Account Configuring the Wireless-G IP Phone SIP Account Roaming Profile PasswordSettings Secure SetupLanguage Clock Alarm ClockCSpeed Dial Call SettingsDisplay Settings Sound SettingsKeypad IP Statistics Allows you to view network packets statistics ToolsHow to Access the Web-based Utility Using the Web-based UtilityStatus Using the Web-based Utility Phonebook E-mail screen Using the Web-based Utility Network Profile SIP Using the Web-based Utility Settings Sound Settings Display Settings Software Information SoftwareBootcode Information BootcodeReboot PasswordCommon Problems and Solutions Appendix a TroubleshootingApplication Start and End Protocol IP Address Enable Wireless-G IP Phone Wireless-G IP Phone Power LED does not light up Can I receive calls while my network is down? Frequently Asked QuestionsAppendix B Glossary Appendix B Glossary Wireless-G IP Phone Wireless-G IP Phone TCP/IP Appendix C SpecificationsStorage Humidity 10% to 95% Non-Condensing Limited Warranty Appendix D Warranty InformationAppendix D Warranty Information FCC Statement Appendix E Regulatory InformationAppendix E Regulatory Information Wireless-G IP Phone Wireless-G IP Phone Wireless-G IP Phone Wireless-G IP Phone Wireless-G IP Phone Wireless-G IP Phone Wireless-G IP Phone Wireless-G IP Phone Wireless-G IP Phone Wireless-G IP Phone Wireless-G IP Phone Wireless-G IP Phone Appendix F Contact Information Appendix F Contact Information