Cisco Systems 8961 manual Communications Manager Feature, Chapters of Cisco Unified Communications

Chapter 8 Configuring Features, Templates, Services, and Users

Telephony Features Available for the Cisco Unified IP Phone

Table 8-1	Telephony Features for the Cisco Unified IP Phone (continued)
Feature		Description	Configuration Reference
Intercom		Allows users to place and receive intercom calls	For more information, go to the “Intercom
		using programmable phone buttons. You can	chapter” chapter in the Cisco Unified
		configure intercom line buttons to:	Communications Manager Feature and
		• Directly dial a specific intercom extension.	Services Guide.
		• Initiate an intercom call and then prompt the
		user to enter a valid intercom number.
		Note If your user logs into the same phone on a
		daily basis using their Cisco Extension
		Mobility profile, assign the phone button
		template that contains intercom
		information to their profile, and assign the
		phone as the default intercom device for
		the intercom line.
		Note Intercom feature does not support
		Extension Mobility Cross Cluster.
Intelligent Session		Reroutes a enterprise originated call to a users’	For more information, go to the “Cisco Unified
Control		mobile phone to the enterprise number. The call	Mobility” chapter in the Cisco Unified
		only rings the user's mobile but not his/her desk	Communications Manager Features and
		phone. When the call is answered on the mobile	Services Guide.
		phone, the desk phone displays a Remote in Use
		message. During these calls, a user can use the
		various features of the mobile phone.
Line select		If this feature is disabled (default), then the	For more information, refer to the option
		ringing line is selected. When enabled, the primary	“Always use prime line” in the following
		line is picked up even if a call is ringing on another	chapters of Cisco Unified Communications
		line. The User must manually select the other line.	Manager Administration Guide:
		Note This feature can also be enabled or	• “Device Profile Configuration”
		disabled for Extension Mobility.	• “Common Phone Profile Configuration”
			• “Cisco Unified IP Phone Services
			Configuration”
Line select for voice		When disabled (default), pressing the Messages	For more information, refer to the option
messages		button selects the line that has a voice message. If	“Always use prime line for voice message” in
		more than one line has voice mail, then the first	the following chapters of Cisco Unified
		available line is selected. When enabled, the	Communications Manager Administration
		primary line is always used to retrieve voice	Guide:
		messages.	• “Device Profile Configuration”
		Note This feature can also be enabled or
			• “Common Phone Profile Configuration”
		disabled for Extension Mobility.
			• “Cisco Unified IP Phone Services
			Configuration”

	Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 8.5 (SIP)
8-14	OL-20861-01