Cisco Systems OL-11591-01 manual 12-13

Chapter 12 IP Video Telephony Configuration

Cisco Unified Videoconferencing Gateway Configuration for Video PSTN Gateway

Cisco Unified Videoconferencing Gateway Configuration for Video PSTN Gateway

This section provides information about configuring a Cisco Unified Videoconferencing gateway for a video PSTN gateway.

For related information, refer to this URL:

http://www.cisco.com/univercd/cc/td/doc/product/ipvc/ipvcgw/index.htm

The following tables show how the 2 PRI port version of the Cisco Unified Videoconferencing 3544 System Gateway module was configured using the Cisco Unified Videoconferencing Administrator web page. Fields not shown in these tables were set to their default values.

•Table 12-9—IPVC/3540 GW > Board > Basics

•Table 12-10—IPVC/3540 GW > Board > Addressing

•Table 12-11—IPVC/3540 GW > Settings > Basics

•Table 12-12—IPVC/3540 GW > Settings > IP Connectivity

•Table 12-13—IIPVC/3540 GW > Settings > Media Modes

•Table 12-14—IIPVC/3540 GW > Settings > Bonding

•Table 12-15—IPVC/3540 GW > Services > Voice

•Table 12-16—IPVC/3540 GW > Services > Video

•Table 12-17—IPVC/3540 GW > PRI > Port 1 Basics

•Table 12-18—IPVC/3540 GW > PRI Port 1 Physical Interface

	Table 12-9	Cisco Unified Videoconferencing MCU Configuration: IPVC/3540 GW > Board >
		Basics
	Field			Setting
	Model number			IPVC-3540-GW2P
	Location			Appropriate value
	Serial number			Appropriate value
	Hardware version			Appropriate value
	Date/Time			Appropriate value
	Slot number			Appropriate value
	Software version			4.0.40
	Table 12-10	Cisco Unified Videoconferencing MCU Configuration: IPVC/3540 GW > Board >
		Addressing
	Field			Setting
	IP Address			Appropriate value
	Subnet Mask			Appropriate value
	Router IP			Appropriate value
	DNS server IP			Appropriate value
			System Test Architecture Reference Manual for IP Telephony
OL-11591-01					12-13