Cisco Systems OL-11591-01 manual Gatekeeper Configuration for IP Video Telephony, 12-7

Page 7

Chapter 12 IP Video Telephony Configuration

Gatekeeper Configuration for IP Video Telephony

SCCP endpoint > Cisco Unified CallManager > Cisco Unified Videoconferencing gateway > PSTN > Cisco Unified Videoconferencing gateway > Gatekeeper > Cisco Unified CallManager > H.323 endpoint

SCCP endpoint > Cisco Unified CallManager > Cisco Unified Videoconferencing gateway > PSTN > H.320 endpoint

H.323 endpoint > Gatekeeper > Cisco Unified CallManager > Cisco Unified Videoconferencing gateway > PSTN > H.320 endpoint

H.323 endpoint > Gatekeeper > Cisco Unified CallManager > Cisco Unified Videoconferencing gateway > PSTN > Cisco Unified Videoconferencing gateway > Gatekeeper >

Cisco Unified CallManager > SCCP endpoint

H.320 endpoint > Cisco Unified Videoconferencing Gateway > Gatekeeper > Cisco Unified CallManager > SCCP or H.323 endpoint

The call routing for video calls functions just as the call routing for audio calls. For more information, refer to the “Understanding Video Telephony” chapter in Cisco Unified CallManager System Guide.

Cisco Unified CallManager supports the Dynamic H.323 Addressing call routing feature. This feature allows H.323 endpoints with DHCP addressing to remain registered to a Gatekeeper while Cisco Unified CallManager controls call routing. For more information, refer to the “Understanding Video Telephony” section in Cisco Unified CallManager System Guide. (Table 12-1provides a link to this document.)

Gatekeeper Configuration for IP Video Telephony

The following sections provide a general description of how gatekeepers were configured for IP Video Telephony:

Gatekeeper Configuration Overview, page 12-7

Gatekeeper Call Routing, page 12-9

Gatekeeper Configuration Overview

Gatekeepers were configured in pairs to create gatekeeper clusters that provide gatekeeper-based Call Admission Control and call routing redundancy. The endpoints must provide alternate gatekeeper registration so that the endpoints can utilize both gatekeepers in the cluster.

Three local gatekeeper zones were created, one for Cisco Unified CallManager, one for Cisco Unified Videoconferencing MCUs, and one for the H.323 endpoints. Zones for Cisco Unified Videoconferencing MCUs and H.323 endpoints were configured with Invia and Outvia parameters. This configuration allows gatekeepers to route incoming and outgoing calls to and from these zones to

Cisco Unified CallManager.

The Send Product ID And Version ID Cisco Unified CallManager service parameter must be set to True to allow the Dynamic H.323 Addressing feature to work and to allow the gatekeeper to route incoming or outgoing calls to the Cisco Unified CallManager in a given zone.

After the Cisco Unified CallManager service parameter Send Product ID And Version ID is set to True, the endpoint type of Cisco Unified CallManager H.225 trunks will change to H323-GW.

The following partial output from the Show Gatekeeper Endpoints command shows a single

Cisco Unified CallManager H.225 trunk that is registered to a gatekeeper:

SJC-RFD-GK-1#show gatekeeper endpoints

GATEKEEPER ENDPOINT REGISTRATION

 

 

System Test Architecture Reference Manual for IP Telephony

 

 

 

 

 

 

OL-11591-01

 

 

12-7

 

 

 

 

 

Image 7
Contents 12-1 Cisco Unified Video Advantage DocumentationDeploying Video Telephony This URL12-2 IP Video Telephony Components and TopologyIP Video Telephony Topology 12-312-4 Supported Call Types12-5 Call RoutingMCU Sccp MCU12-6 Gatekeeper Configuration Overview Gatekeeper Configuration for IP Video Telephony12-7 12-8 12-9 Gatekeeper Call RoutingAppropriate value MC10A12-10 12-11 SJC-RFD-MCU-112-12 Appropriate values12-13 12-14 12-15 12-16 Region Configuration in Cisco Unified CallManager Cisco Unified CallManager Configuration Overview12-17 12-18 Capabilities Exchange with Intercluster Trunks12-19 SIP Trunk Calls with Asymmetric Regions12-20 Transcoders and Call Transfer12-21 Video Deployment with Rsvp12-22 3shows a basic video deployment using Cisco Rsvp AgentSccp Video Conference Bridge Gatekeeper Configuration in Cisco Unified CallManagerMCU Configuration in Cisco Unified CallManager CallManager Administration GuideSjccss Video Conference BridgeSJC MrglsjcvideoVideo Pstn Gateway Route Pattern Configuration for MCU Service12-25 12-26 Video Endpoints Configuration12-27 Phone Configuration for Tandberg Sccp Video EndpointsCisco Unified CallManager Administration Guide SJC-TBERG-2SJC-VIDEO-GK1 No applicable12-28 12-29 IP address of the H.323 endpoint12-30 Cisco Unified Video Advantage Administration Guide