Cisco Systems OL-11591-01 Phone Configuration for Tandberg Sccp Video Endpoints, SJC-TBERG-2

Page 27

Chapter 12 IP Video Telephony Configuration

Video Endpoints Configuration

For additional information about adding and configuring phones and endpoints in Cisco Unified CallManager, refer to the “Cisco Unified IP Phone Configuration” chapter in

Cisco Unified CallManager Administration Guide.

Phone Configuration for Tandberg SCCP Video Endpoints

To access the Cisco Unified CallManager Administration web pages for adding and configuring video endpoints, choose Device > Phone from the Cisco Unified CallManager Administration application.

TANDBERG Video Endpoint will appear as a phone device type in Cisco Unified CallManager Administration only if you first install the Tandberg Cisco Unified CallManager Plug-in on the publisher node in the cluster. For information about accessing and installing this patch, see your Tandberg documentation.

One Tandberg SCCP video endpoint was configured for the Very Large Campus Clustering over the WAN deployment model. Table 12-30shows how this device was configured. Field not shown in shown in this table were set to their default values.

Table 12-30

Phone Configuration for Tandberg SCCP Video Endpoint

 

 

 

Field

 

Setting

 

 

 

MAC Address

 

00506000FAD6

 

 

 

Description

 

SJC Tandberg-1

 

 

 

Owner User ID

 

blank

 

 

 

Device Pool

 

DP-Video

 

 

Calling Search Space

SJC_CSS

 

 

 

Phone Configuration for Gatekeeper-Controlled H.323 Video Endpoints

To access the Cisco Unified CallManager Administration web pages for adding and configuring video endpoints, choose Device > Phone from the Cisco Unified CallManager Administration application.

The video endpoints were entered in Cisco Unified CallManager Administration as an H.323 client device model type.

Table 12-31shows how one of these devices was configured. Fields not shown in this table were set to their default values.

Note All gatekeeper-controlled H.323 endpoints that are assigned to the same device pool and Cisco Unified CallManager group must be configured with the same zone setting.

 

 

Table 12-31

Phone Configuration for Gatekeeper-Controlled H.323 Video Endpoint

 

 

 

 

 

 

 

 

Field

 

 

Setting

 

 

 

 

 

 

 

 

Device Name

 

 

SJC-TBERG-2

 

 

 

 

 

 

 

 

Description

 

 

SJC Tandberg-2

 

 

 

 

 

 

 

 

Device Pool

 

 

DP-Video

 

 

 

 

 

 

 

Common Phone Profile

 

Standard Common Phone Profile

 

 

 

 

 

 

 

 

 

 

 

 

System Test Architecture Reference Manual for IP Telephony

 

 

 

 

 

 

 

 

 

OL-11591-01

 

 

 

 

12-27

 

 

 

 

 

 

 

Image 27
Contents 12-1 Cisco Unified Video Advantage DocumentationDeploying Video Telephony This URL12-2 IP Video Telephony Components and TopologyIP Video Telephony Topology 12-312-4 Supported Call Types12-5 Call RoutingSccp MCU MCU12-6 Gatekeeper Configuration for IP Video Telephony Gatekeeper Configuration Overview12-7 12-8 12-9 Gatekeeper Call RoutingMC10A Appropriate value12-10 12-11 SJC-RFD-MCU-112-12 Appropriate values12-13 12-14 12-15 12-16 Cisco Unified CallManager Configuration Overview Region Configuration in Cisco Unified CallManager12-17 12-18 Capabilities Exchange with Intercluster Trunks12-19 SIP Trunk Calls with Asymmetric Regions12-20 Transcoders and Call Transfer12-21 Video Deployment with Rsvp12-22 3shows a basic video deployment using Cisco Rsvp AgentSccp Video Conference Bridge Gatekeeper Configuration in Cisco Unified CallManagerMCU Configuration in Cisco Unified CallManager CallManager Administration GuideSjccss Video Conference BridgeSJC MrglsjcvideoRoute Pattern Configuration for MCU Service Video Pstn Gateway12-25 12-26 Video Endpoints Configuration12-27 Phone Configuration for Tandberg Sccp Video EndpointsCisco Unified CallManager Administration Guide SJC-TBERG-2No applicable SJC-VIDEO-GK112-28 12-29 IP address of the H.323 endpoint12-30 Cisco Unified Video Advantage Administration Guide