Chapter 12 IP Video Telephony Configuration
Video Endpoints Configuration
Table
Field | Setting |
|
|
Secure Shell Information |
|
|
|
Secure Shell User | blank |
|
|
Secure Shell Password | blank |
|
|
Phone Configuration for SCCP Video Endpoints with Associated Cisco Unified Video Advantage
Cisco Unified Video Advantage clients were installed and configured for the Very Large Campus with Clustering over the WAN site model and for the Large SIP Site deployment model. These Cisco Unified Video Advantage clients were installed on a mix of phone models, including the Cisco IP Phone 7940G/7941G/7960G/7961G/7970G/7971G.
Note Cisco Unified VT Advantage version 1.0(2) is supported only on SSCP phones.
For additional information about installing Cisco CT Advantage and configuring Video endpoints in Cisco Unified CallManager, refer to the following documents. (Table
•“Understanding Video Telephony” chapter in Cisco Unified CallManager System Guide
•Cisco Unified Video Advantage Administration Guide
To configure a phone with an associated Cisco Unified Video Advantage, choose Device > Phone from Cisco Unified CallManager Administration.
Table
Table
Field | Setting |
|
|
Video Capabilities | Enabled |
|
|
| System Test Architecture Reference Manual for IP Telephony |
|