Cisco Systems OL-11591-01 manual 3shows a basic video deployment using Cisco Rsvp Agent, 12-22

Page 22

Chapter 12 IP Video Telephony Configuration

Cisco Unified CallManager Configuration for IP Video Telephony

In addition to Cisco RSVP Agent, you can use Cisco Unified CallManager region and location settings to establish video bandwidth for a call. However, with the introduction of RSVP agent in video call, the following rule is required to establish the bandwidth for a video call:

end-to-end video region = minimum of (region (A,agentA), region(agentA,agentB), region(agentB,B) and region(A,B) )

Figure 12-3shows a basic video deployment using Cisco RSVP Agent.

Figure 12-3 Basic Video Deployment with Cisco RSVP Agent

Cisco Unified CallManager

Location A

Location B

Cisco RSVP

Cisco RSVP

Agent A

Agent B

 

RSVP/RTP

SCCP H.323 SIP

Phone Video Phone

Phone

SCCP SIP RTP H.323

SIP H.323

Phone Video

Phone

SCCP

Phone

155487

The following configuration was used for the Cisco RSVP Agent. The codec pass-through allows the audio transcoding of a video call:

dspfarm profile 2 transcode codec pass-through

codec gsmfr codec g729ar8 codec g729abr8 codec g711ulaw codec g711alaw rsvp

maximum sessions 8 associate application SCCP

The following command confirms that the Cisco RSVP Agent is configured properly:

SCCP Admin State: UP

User Masked Codec list: None

Call Manager: 10.10.110.11, Port Number: 2000

 

 

 

 

Priority: 1, Version: 5.0.1, Identifier: 1

 

 

 

Transcoding Oper

State: ACTIVE - Cause Code: NONE

 

 

 

Active Call Manager: 10.10.110.11, Port Number: 2000

 

 

 

TCP Link Status: CONNECTED, Profile Identifier: 2

 

 

 

Reported Max Streams: 16, Reported Max OOS Streams: 0

 

 

 

Supported Codec: pass-thru, Maximum Packetization Period: N/A

 

 

 

Supported Codec: gsmfr, Maximum Packetization Period: 20

 

 

 

Supported Codec: g729ar8, Maximum Packetization Period: 60

 

 

 

Supported Codec: g729abr8, Maximum Packetization Period: 60

 

 

 

System Test Architecture Reference Manual for IP Telephony

 

 

 

 

12-22

 

 

OL-11591-01

 

 

 

 

 

Image 22
Contents This URL Cisco Unified Video Advantage DocumentationDeploying Video Telephony 12-1IP Video Telephony Components and Topology 12-212-3 IP Video Telephony TopologySupported Call Types 12-4Call Routing 12-5MCU Sccp MCU12-6 Gatekeeper Configuration Overview Gatekeeper Configuration for IP Video Telephony12-7 12-8 Gatekeeper Call Routing 12-9Appropriate value MC10A12-10 SJC-RFD-MCU-1 12-11Appropriate values 12-1212-13 12-14 12-15 12-16 Region Configuration in Cisco Unified CallManager Cisco Unified CallManager Configuration Overview12-17 Capabilities Exchange with Intercluster Trunks 12-18SIP Trunk Calls with Asymmetric Regions 12-19Transcoders and Call Transfer 12-20Video Deployment with Rsvp 12-213shows a basic video deployment using Cisco Rsvp Agent 12-22CallManager Administration Guide Gatekeeper Configuration in Cisco Unified CallManagerMCU Configuration in Cisco Unified CallManager Sccp Video Conference BridgeMrglsjcvideo Video Conference BridgeSJC SjccssVideo Pstn Gateway Route Pattern Configuration for MCU Service12-25 Video Endpoints Configuration 12-26SJC-TBERG-2 Phone Configuration for Tandberg Sccp Video EndpointsCisco Unified CallManager Administration Guide 12-27SJC-VIDEO-GK1 No applicable12-28 IP address of the H.323 endpoint 12-29Cisco Unified Video Advantage Administration Guide 12-30