Cisco Systems OL-11591-01 manual 12-16

Chapter 12 IP Video Telephony Configuration

Cisco Unified CallManager Configuration for IP Video Telephony

Table 12-18	Cisco Unified Videoconferencing MCU Configuration: PVC/3540 GW > PRI Port 1 >
	Physical Interface
Field		Setting
Interface		E1/T1
Country		Appropriate value
Network access		Appropriate value
Signaling protocol		Appropriate value

Cisco Unified CallManager Configuration for IP Video Telephony

The following sections provide an overview of how Cisco Unified CallManager was configured for IP Video telephony testing. For additional information about how Cisco Unified CallManager was configured for Cisco IP Communications Release 5.1(1) testing, see Chapter 2, “Cisco Unified CallManager Configuration.”

•Cisco Unified CallManager Configuration Overview, page 12-17

•Region Configuration in Cisco Unified CallManager, page 12-17

•Video Deployment with RSVP, page 12-21

•Gatekeeper Configuration in Cisco Unified CallManager, page 12-23

•MCU Configuration in Cisco Unified CallManager, page 12-23

•Route Pattern Configuration for MCU Service, page 12-25

•Cisco Unified Videoconferencing PSTN Gateway Configuration for Cisco Unified CallManager, page 12-25

	System Test Architecture Reference Manual for IP Telephony
12-16	OL-11591-01