Chapter 9: SOHO 6 WebBlocker

Configure the SOHO 6 WebBlocker

Use the WatchGuard SOHO 6 Configuration pages to activate WebBlocker, create a full access password for bypassing WebBlocker, define an inactivity timeout that sets the duration of the full access password, define the categories you want to block, and configure WebBlocker groups and users.

Activate WebBlocker

Follow these instructions to activate WebBlocker, create a full access password, define the inactivity timeout value, and require that your Web users authenticate (if your are using the groups and users feature option).

1With your Web browser, go to the SOHO 6 Configuration

Settings page using the Trusted IP address of the SOHO 6.

For example, if using the default IP address, go to: http://192.168.111.1

2From the navigation bar on the left side, select

WebBlocker => Settings.

The WebBlocker Settings page appears.

98

WatchGuard Firebox SOHO 6.1

Page 116
Image 116
WatchGuard Technologies SOHO 6.1 manual Configure the Soho 6 WebBlocker, Activate WebBlocker, WebBlocker = Settings