Chapter 4: Configure the Network Interfaces

4Disable the checkbox labeled Enable DHCP Server on the Trusted Network.

5Click Submit and reboot the SOHO 6 as necessary.

6Configure your computers and other devices on the trusted network with static addresses.

Configure Static Routes

The SOHO 6 allows you to configure static routes in order to pass traffic to networks on separate segments. This means that the SOHO 6 can route data packets to additional networks connected to a router or switch behind the SOHO 6.

Follow these instructions to configure static routes:

1With your Web browser, go to the System Status page using the

Trusted IP address of the SOHO 6.

For example, if using the default IP address, go to: http://192.168.111.1

2From the navigation bar on the left side, select Network => Routes.

40

WatchGuard Firebox SOHO 6.1

Page 58
Image 58
WatchGuard Technologies SOHO 6.1 manual Configure Static Routes