Chapter 2: Installation

numbered, Ethernet ports (labeled 0-3) on the SOHO 6. Connect the other end into the Ethernet port of your computer.

The SOHO 6 is now connected to the Internet and your computer.

4If you connect to the Internet using a DSL/cable modem, restore the power to this device. When the indicator lights of the modem stop flashing the modem is ready for use.

5Attach the AC adapter to the SOHO 6 and connect it to a power source.

6Restart your computer.

For information on the factory default configuration options, see “Default Factory Settings” on page 25. For specialized configurations, see “Configure Your External Network” on page 31, as well as, “Configure the Trusted Network” on page 36.

Cabling the SOHO 6 for more than four computers

While there are only four, numbered, Ethernet ports (labeled 0-3) on the back of the SOHO 6, it is possible to connect more appliances to your SOHO 6 using network hubs.

20

WatchGuard Firebox SOHO 6.1

Page 38
Image 38
WatchGuard Technologies SOHO 6.1 manual Cabling the Soho 6 for more than four computers