Chapter 4: Configure the Network Interfaces

4Enter the TCP/IP settings you recorded from your computer during the installation process. Refer to the table in, “Review and record your current TCP/IP settings” on page 12.

5Click Submit.

The configuration change is saved to the SOHO 6.

Configure the SOHO 6 External Network for PPPoE

While less common, PPPoE is another method for an ISP to assign IP addresses. Check the information and manuals sent to you by your ISP to see if they use PPPoE. If you cannot find this information, contact your ISP and ask them. You need your PPPoE login name and password.

To configure the SOHO 6 for PPPoE:

1Open your Web browser and click Stop.

At this point, the Internet connection is not fully configured, and the computer cannot load your home page from the Internet. However, the computer can access the configuration Web pages installed on the SOHO 6.

2With your Web browser, go to the System Status page using the

trusted IP address of the SOHO 6.

For example, if using the default IP address, go to: http://192.168.111.1

3From the navigation bar on the left side, select

Network => External.

The External Network configuration page appears.

34

WatchGuard Firebox SOHO 6.1

Page 52
Image 52
WatchGuard Technologies SOHO 6.1 manual Configure the Soho 6 External Network for PPPoE