User Guide 13
Before You Begin
2 At the default prompt, type ipconfig/all, then press Enter.
3 Enter the TCP/IP settings in the chart provided below.
4 Click Cancel.
Microsoft Windows NT
1 Click Start => Programs => Command Prompt.
2 At the default prompt, type ipconfig/all, then press Enter.
3 Enter the TCP/IP settings in the chart provided below.
4 Click Cancel.
Microsoft Windows 95 or 98 or ME
1 Click Start => Run.
2Type:
winipcfg. Click OK.
3 Select the “Ethernet Adapter.”
4 Enter the TCP/IP settings in the chart provided below.
5 Click Cancel.
Macintosh
1 Click the Apple me n u => Control Panels => TCP/IP.
2 Enter the TCP/IP settings in the chart provided below.
3Close the window.
Other operating systems (Unix, Linux)
1 Consult your operating system guide to locate the TCP/IP
screen.
2 Enter the settings in the chart provided below.