Patton electronic SL4050/2 manual Disable Adsl dialup, Dhcp Dynamic Host Configuration Protocol

SmartLink 4050 Series Getting Started Guide 2 • Installing the SmartLink SIP Phone

DISABLE ADSL dialup

1.Press

2.Use to select DISABLE

DHCP (Dynamic Host Configuration Protocol)

DHCP allows the network administrator to distribute IP addresses when a computer is plugged into a different place in the network. If your ISP provides static IP address, you must disable DHCP and enter the IP address provided.

ENABLE DHCP

1.Press

2.Use or to set DHCP to ENABLE

3.Press . The IP address is automatically acquired

4.Press . The subnet mask is automatically acquired

5.Press . The router IP address is automatically acquired

DISABLE DHCP

1.Press

2. Use or to set DHCP to DISABLE

3.Press . Use the numeric keypad to enter the IP address

4.Press . Use the numeric keypad to enter the subnet mask

Setting up the VoIP SIP phone 27