SmartLink 4050 Series Getting Started Guide | 3 • Using the configuration menu |
|
|
Call Waiting
Click to Enable or Disable call waiting.
Anonymous Call
Select how much information about the SIP phone user will be sent to the called party’s phone:
•
•Full
•Display
Anonymous Call Reject
Click Enable to reject anonymous calls. Click Disable to accept anonymous calls.
Call Forward
Select how call forwarding is handled:
•No
•
•
Timer
NTP Recycle
NTP recycle time.
Inter Digit
The time interval that the IP phone waits to detect the end of DTMF digits. No more digits are accepted after this period and the phone begins to dial.
Originating Not Accept
The time interval that the caller’s phone waits to establish a call. If the receiver fails to answer the phone during this time interval, the caller’s phone will automatically disconnect.
Incoming No Answer
The time interval that the receiver’s phone will ring. If the receiver fails to answer the phone during this time interval, the phone will automatically disconnect.
Hold Recall
The time interval that the caller is put on hold before the phone automatically disconnect.
Phone Settings | 50 |