SmartLink 4050 Series Getting Started Guide | 5 • Using the Phone Book |
|
|
Dialing from the Phone Book
1.Press the PHONE BOOK 
button to access the phone book.
2.Press the down 
button to scroll down the list until the desired name is displayed on the screen.
3.Press OK 
to dial.
Storing a number
1.Press and hold the PHONE BOOK 
button until Name displays on the screen.
2.Use the numeric keypad to type a name, then press OK 
Note To type text characters, press the appropriate key on the numeric keypad (see figure 1 on page 17). For example, to type a “z” press the 9 key until the low- ercase z
9 W X Y Z w x y z.
3.Use the numeric keypad to type the number that corresponds to the name, then press OK
4.Press OK 
again to save the changes to the Phone Book.
5.Repeat steps 1 through 4 to store additional phone numbers.
Editing a Phone Book listing
1.Press the PHONE BOOK 
button to access the phone book.
2.Press the down 
button to scroll down the list until the desired name is displayed on the screen.
3.Press the PHONE BOOK 
button again.
4.Select Edit and press OK 
to begin editing.
5.Use the numeric keypad to type a new name, then press OK 
Note To type text characters, press the appropriate key on the numeric keypad (see figure 1 on page 17). For example, to type a “z” press the 9 key until the low- ercase z
9 W X Y Z w x y z.
6.Use the numeric keypad to type the new number that corresponds to the name, then press OK
7.Press OK 
to save changes, overwriting the previous name and phone number.
Dialing from the Phone Book | 63 |