Telephone operation
Options while on calls
Chain dialing
Use this feature to initiate a dialing sequence from the numbers in the directory, caller ID history or redial memory while you are on a call.
Chain dialing can be useful if you wish to access other numbers (such as bank account numbers or access codes) from the directory, caller ID history or redial list.
To access the directory while on a call: 1. Press MENU/SELECT.
2.Press MENU/SELECT again to enter >Directory.
3.Press qCID or pDIR to scroll to the desired number.
4.Press MENU/SELECT to dial the number shown.
To access the caller ID history (call log) while on a call:
1.Press MENU/SELECT.
2.Press qCID or pDIR to scroll to >Call log, then press
MENU/SELECT.
3.Press qCID or pDIR to scroll to the desired number.
4.Press MENU/SELECT to dial the number shown.
To access the redial list while on a call:
1.Press REDIAL/PAUSE to show the most recently dialed number.
2.Press qCID or pDIR to scroll to the desired number, then press MENU/SELECT to dial the number shown.
NOTES:
1.You cannot edit a directory entry while on a call. For more details about the directory, see page 29.
5:30AM 8/06
REDIAL
2.You cannot copy a caller ID entry into the directory while on a call. For more details about the caller ID history, see page 34.
3.If you press REDIAL/PAUSE while on a call, you can only view the 20 most recently dialed numbers and you cannot erase the entries. For more details about the redial memory, see page 22.
4.Press
OFF/CLEAR to exit redial, directory or caller ID history when on a call.
Temporary tone dialing
If you have pulse (rotary) service only, you can switch from pulse to touch- tone dialing temporarily during a call. This is useful if you need to send
1.During a call, press TONE 
.
2.Use the dial pad keys to enter the desired number. The telephone sends touch- tone signals.
3.The telephone automatically returns to pulse dialing mode after you end the call.
25