AT&T Door Phone Controller operation manual

Page 20

8 . WARNING: RISK OF ELECTRICAL SHOCK – EQUIPMENT MUST BE PROPERLY GROUNDED. Your AT&T equipment requires a properly grounded three-prong power receptacle for safe operation. Have the receptacle checked by a qualified electrician before connecting this equipment. Do not cut or remove the third (ground) prong from the power transformer. Do not use two-prong extension cords or adapters to defeat the safety features of this equipment. If you have a two-prong receptacle, it must be replaced with a three-prong receptacle, installed by a qualified electrician.

9.Do not allow anything to rest on the power cord. Do not locate this product where the cord will be abused by per- sons walking on it.

10.Do not overload wall outlets and extension cords as this can result in the risk of fire or electric shock.

11.Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a risk of fire or electric shock. Never spill liquid of any kind on the product.

12.To reduce the risk of electric shock, do not disassemble this product, but take it to a qualified serviceman when some service or repair work is required. Opening or removing covers may expose you to dangerous voltages or other risks. Incorrect reassembly can cause electric shock when the appliance is subsequently used.

13.Unplug this product from the wall outlet and refer servic- ing to qualified service personnel under the following conditions:

A.When the power supply cord or plug is damaged or frayed.

B. If liquid has been spilled into the product.

2-4 Installation Procedures

Page 19 Page 21
Image 20
Page 19 Page 21
Contents AT&T Compatibility AT&T Door Phone Controller Compatibility Chart PlusApplication Notes for Compatibility Chart Application Notes for Compatibility Chart Contents Troubleshooting and Maintenance Page Figures Page Tables Introduction Using This Manual Features AT&T Door Phone ControllerSpeaker Volume Talk Back DIP Switch LED Terms You Should Know PBX Private Branch Exchange -Business telephoneInstallation Procedures Installation Procedures Important Safety Instructions Page General Information Introduction Door Phone Controller Back Panel ConnectionsPage Prior To Installation Door Phone Controller Back Panel ConnectionsAT&T Door Phone Controller Location Typical AT&T Door Phone Controller Installation Wall Mount Instructions InstallationMounting Instructions Mounting AT&T Door Phone Controller to Wall Remote Door Open Switch optional SHIELDED, Twisted PAIR, 24 AWG Connections for Remote Door Open Switch optional Electric Door Strike Plate Device optionalConnections for Electric Door Strike Plate optional Connecting Power Auxiliary Alert Device optionalConnections for Auxiliary Alert Device optional Installation Procedures Speaker Volume Control Talk Back Volume ControlOperation and Controls Information Door Ajar FunctionLED Configuration of Telephone Equipment Flow Chart Installation Home/Residential DIP Switch Selections OverviewHome/Residential DIP Switch Settings AT&T Door Phone Controller Back Panel Option Selection AT&T Door Phone Controller Option Selection Information Answering a Call from the Door Speaker Operation Basic Door Answer FunctionVisitor Presses Door Speaker Button Calling the Door Speaker from Inside the Building Telephone Line In Use With Door When Incoming Call Arrives Installation Dedicated Trunk Port Overview DIP Switch Setting for PBX with Dedicated Trunk Port Telephone System 2b. Ground Start Installations Option Selection Page Options Mode Option Press Listen Default Verify For Calling the Door Speaker Installation for PBX Equipment With Available Station Port Overview G E ND Telephone System Option Selection Page Options Mode Option Listen Press Default Verify For Operation Auxiliary Alert Mode Basic Door Answer FunctionRingdown Mode Basic Door Answer Function Opening door will terminate station mode access Installation No Dedicated Trunk/Station Port DIP Switch Selections DIP Switch Setting for PBX With Shared Trunk Port AT&T Door Phone Controller Back Panel Option Selection Port Saver or Trunk Saver Mode Installation Port Saver ModeTrunk Saver Mode Delay Operation Basic Door Answer Function Calling the Door Speaker From Inside the Building Telephone Line In Use With Door When a Call Arrives Placing a Call Through the C.O. From Inside BuildingTroubleshooting and Maintenance Troubleshooting Procedures Troubleshooting ProceduresWhen door ajar switch is not Maintenance Operating as ExpectedAppendix A-DIP Switch Settings Setting the DIP Switch PositionsNot used Appendix B-Option Selection Mode Definitions Ring/Chime Cadence Ring/Chime DurationPage Appendix C-Specifications ElectricalMechanical Ring Generator Line JackInstallation Information Using With an Answering Machine Installation Instructions Appendix E-Auxiliary Alert OptionPage Figure E-1. Connections For Auxiliary Alert Device FCC Part FCC Regulations and Warranty Warranty Information Limited Warranty and Limitation of LiabilityFCC Regulations and Warranty AT&T Door Phone Controller Option Selection MemoryDIP Switch Settings Door Phone Controller1992 AT&T CIC# 0II722050-055 Issue 3, November

Door Phone Controller specifications

The AT&T Door Phone Controller is a cutting-edge device designed to enhance home security and communication. This innovative system seamlessly integrates with a home's existing telephone network, allowing users to monitor and communicate with visitors at their door without needing to install a separate intercom system. With its user-friendly interface and advanced features, the AT&T Door Phone Controller is a valuable addition to any modern home.

One of the standout features of the AT&T Door Phone Controller is its ability to connect with a standard telephone line. This means homeowners can answer their door from anywhere in the house, using their existing landline phones or cordless handsets. The device is equipped with a high-quality speaker and microphone, ensuring clear two-way communication. This is particularly useful for homeowners who may not always be near the front door or those who wish to maintain their privacy by not opening the door to strangers.

In terms of technology, the AT&T Door Phone Controller utilizes a reliable digital signal processing system that enhances audio clarity and reduces background noise. This ensures that every conversation is heard loud and clear, even in noisy environments. The device also features adjustable volume levels, allowing users to customize the audio output according to their preferences.

Another significant characteristic of the AT&T Door Phone Controller is its built-in video capability. Some models come equipped with a camera that provides a live video feed of the person at the door, enhancing security by allowing homeowners to visually verify their visitors. This feature can be particularly beneficial for those who live in areas with high foot traffic or those who receive frequent deliveries.

The installation process is straightforward, as the device connects to existing wiring and does not require complicated setups or additional hardware. Moreover, it is designed to withstand various weather conditions, making it a durable choice for outdoor use.

In conclusion, the AT&T Door Phone Controller is an innovative solution for enhancing home security and communication. Its integration with existing telephone systems, high-quality audio technology, optional video capabilities, and ease of installation make it an excellent choice for homeowners looking to modernize their entryway while ensuring safety and convenience.
Top Page Image Contents