AT&T Door Phone Controller operation manual Electric Door Strike Plate Device optional

If your Electric Door Strike Plate has more than a 1 Amp current draw, then an external relay arrangement is required.

An electric door strike plate is used to automatically open a closed or locked door. A low-voltage device (24V or less) is recommended. The AT&T Door Phone Controller can provide an open or closed contact when requested to interface to and to operate your electric door strike plate device. Once an electric door strike plate has been installed, it can be controlled by the AT&T Door Phone Controller unit, either from entering the appropriate digits from a touch tone phone or from the Remote Open switch (push button).

Follow the steps below and refer to Figure 2-6for wiring the door strike plate device to the AT&T Door Phone Controller.