AT&T CL81219, CL81209 user manual Multiple handset use, Handset locator

Multiple handset use

Multiple handset use

Handset locator

The handset locator feature is useful if you misplace any handset. To start the paging tone:

•Press HANDSET LOCATOR at the telephone base to start the paging tone on all handsets for 60 seconds.

NOTE: If you press OFF/CLEAR or MUTE/DELETE on a handset, the ringer of the handset is off, but the page tone does not stop.

To stop the paging tone:

•Press PHONE/FLASH, SPEAKER, or any dial pad key (0-9, *, or #) on the handset(s).

–OR–

• Press HANDSET LOCATOR on the telephone base.

**PAGING**

NOTE: The handset ringer volume also determines the volume of the paging tone. If the handset ringer volume level is set to off, that handset is silent for all calls and paging (page 11).

Join a call in progress (not available on model CL81109)

You can conference with another system handset while on a call. If a handset is

already on a call and you would like to join the call, press PHONE/FLASH or SPEAKER on another system handset.

Press OFF/CLEAR or place the handset in the telephone base or charger to end the call. The call does not terminate until all handsets hang up.

NOTE: You can only use two system handsets at the same time on an outside call.

20