AT&T 9311 user manual Headset Jack, Operating Range

Page 13

TELEPHONE OPERATION

Headset Jack

You can use this telephone hands-free when you install a 2.5 mm headset (SKU 24099), purchased separately.

Plug the headset into the jack located on the right side of the handset (under the small rubber flap). Do not force the connection, but make sure the plug fits securely.

Operating Range

This cordless telephone operates within the maximum power allowed by the Federal Communications Commission (FCC). Even so, this handset and base can communicate over only a certain distance — which can vary with the locations of the base and handset, the weather, and the construction of your home or office. For best performance, keep the base antenna fully upright.

If you receive a call while you are out of range, the handset might not ring — or if it does ring, the call might not connect when you press P. Move closer to the base, then press Pto answer the call.

If you move out of range during a phone conversation, you might hear noise or interference. To improve reception, move closer to the base.

If you move out of range without pressing O, your phone will be left “off the hook.” To hang up properly, walk back into range, periodically pressing O.

11

Image 13
Contents Part 1 Important Product Information MHz Cordless TelephoneAdvanced American Telephones. All rights reserved Contents Page Before You Install InstallationInstall the handset battery Attach the belt clip to the cordless handset optional Set the dial mode Table/Desk InstallationCheck for dial tone Connect the telephone line cord Connect the power cord Wall InstallationPosition the wall mount adapter on the base Mount the base on the wall Follow Steps 3-5 in Table/Desk InstallationTelephone Operation Telephone Operation Temporary Tone Dialing Ringer Off/Battery SaveHandset Ringer Style Operating Range Headset JackTelephone Memory Batteries Charging the Handset Battery PackReplacing the Handset Battery Pack Case of Difficulty If the phone does not ring when you receive a callIf the phone doesn’t work at all, check these items first If you hear other calls while using your phone If you hear noise or interference when using the phoneIf you lose a call after changing channels