Appendix
Display screen messages, lights and tones
Alert tones
Handset battery is low. Place handset in | |
(Double beep every 5 seconds) | base to charge the battery. |
Error tone (current operation has been unsuccessful; try again). Or handset has not registered with base. Place handset in base to
Volume is at the highest or lowest setting. | ||
(1 double beep) |
|
|
|
|
|
“Beep” | Handset has registered with base. | |
(Single beep) |
|
|
|
|
|
“Beeeeeeeeep” | Confirm tone (current operation has been | |
(1 long beep) | successfully completed). | |
|
|
|
Indicator lights
ON/OFF
On when answering system is turned on.
PLAY/STOP
Flashing: There are new messages in your mailbox.
Steady: There are no new messages in your mailbox.
NEW CALL
If you have Caller ID service: Flashes when new calls have been received; off when all new Caller ID records have been reviewed (see page 23).
MUTE
On when base microphone is muted.
INTERCOM Flashing: Base is paging handset. Steady: Intercom is in use.
IN USE/CHARGING
Steady: Handset battery is charging.
Flashing: Phone is in use, or call is on hold.
SPEAKERPHONE Steady: Base speaker- phone is in use. Flashing: Call is on hold.
38