Uniden 7500AI manual Vip, Display shows the VIP icon, Storing a CID as a VIP Caller

Page 28

BASIC OPERATION

VIP

The 7500 allows 12 sets of Caller ID to be stored as a VIP caller. Each time a VIP caller calls, the 7500AI will sound a special tone or alert which is different from the ringer tone.

NOTE: The VIP alert will not sound if the VIP alert setting is not activated. See page 16 to see how to turn the VIP alert on or off.

When a VIP call is received by your 7500AI,	CALL#
the display shows the VIP icon.	PM
the display shows the VIP icon.	VIP OGM1 OGM2 ANS ON

UNIDEN

Storing a CID as a VIP Caller

1. Select the CID to be set as a VIP by pressing SKIP and REPEAT.

2. Press and hold VIP until you hear the	CALLBACK DELETE	VIP
confirmation beep. The VIP icon then	OGM2 OGM1	MEMO ANSWER
appears on the display.

NOTE: • A four tone beep sounds when VIP is pressed and there is no CID stored in the VIP list.

•If there are already 12 CIDs stored as VIP callers the display will show

VIP IS FULL.

To view the VIP CID List

1.Press VIP. The display immediately shows the first VIP CID.

2.Press REPEAT to scroll though the rest of the CID on the list.

BASIC OPERATION

25

Image 28

Contents 7500AI Contents Warranty Remote OperationSafety Information Read this Before InstallationSafety Information Introduction Congratulations on the purchase of your 7500AI DigitalParts Checklist Splitter for New Zealand Splitter for AustraliaYour 7500AI’S Features Include Memory Backup 9V BatteryInstallation Selecting a LocationConnecting Power Memory TestMessage After the counter reaches 22, the 7500AIBackup Battery Controls & Functions Answer On/OffDate VIP Alert on IndicatorCaller’s Name Setting UP Security CodeLCD Contrast Security CodeSET CBT Code SundayVIP Alert on Time and DateTS Toll Saver Number of RingsOutgoing Messages OGM OGM2 Recording OGM1 RecordingRecording Outgoing Messages OGM1 Playing OGM2 PlayingTo play your outgoing OGM 1 message At any time, press OGM1, the 7500AISetting the 7500AI to Answer Calls Basic OperationTo Turn the 7500AI On To Announce OnlyICM Recording MSG FullRecording Incoming Messages Caller hangs upUniden PrivateEND of Calls PayphoneConversation Recording a Memo Screening CallsMemo. The 7500AI beeps once, and the increases by one Call Timer WAY RecordingXX Messages TWO-WAY RecordingReviewing Calls Reviewing NEW CallsPause Calls with MessagesPlaying Messages Pause During Message PlaybackPlaying NEW Messages only Adjusting the VolumeReplaying or Skipping Messages While on Review VIP Display shows the VIP iconStoring a CID as a VIP Caller To view the VIP CID ListWaiting DialingPick UP Phone CallbackDeleting Calls Deleting Calls and MessagesDeleting Messages Using Call Breakthrough CBT CBT AlertTo use the CBT code in a call Call your telephone number Changing the CBT CodeAutomatic 7500AI Switch On for Australian version only Remote OperationRemote Operation Call your telephoneUsing Remote Commands Remote OperationChanging the Remote Operation Security Code Care and Maintenance Troubleshooting Problem SuggestionWarranty Troubleshooting Warranty Resetting the 7500AIProcedure for Obtaining Performance of Warranty Clear Signal of What’s Ahead