Uniden 7500AI manual Troubleshooting, Problem Suggestion

Page 36

TROUBLESHOOTING

If your 7500AI 7500AI unit is not performing to your expectations, please try these simple steps.

PROBLEM	SUGGESTION
Answering system does not work	• Make sure the telephone line cord
	is plugged in.
	• Make sure that the AC Adaptor
	is plugged in.
	• Make sure the 7500AI is turned on.
	• There has been a power failure.
	Disconnect the telephone line cord,
	reset the 7500AI (refer to page 38) and
	re-connect the telephone line cord.

Answering System does not answer	• The memory may be full. Delete some
after the set number of rings.	or all of the saved messages.
	• You might have exceeded the total
	number of REN. See page 5.

Messages are incomplete.	• The incoming messages may be too
	long.
	• The memory may be full. Delete some
	or all of the saved messages.

No sound on the speaker during call	• Adjust the volume control on the side
monitoring or message playback.	the 7500AI.

Cannot record outgoing message (OGM)	• The memory may be full. Delete some
	or all of the saved messages.

Cannot access remote call-in features	• Make sure you’re using the correct
from another touch-tone phone.	security number.
	• Make sure that the touch-tone phone
	you’re using can transmit the tone for
	at least two seconds. If it cannot, you
	may have to change to another phone.

33

Image 36

Contents 7500AI Contents Warranty Remote OperationSafety Information Read this Before InstallationSafety Information Introduction Congratulations on the purchase of your 7500AI DigitalParts Checklist Splitter for New Zealand Splitter for AustraliaYour 7500AI’S Features Include Memory Backup 9V BatteryInstallation Selecting a LocationConnecting Power Memory TestMessage After the counter reaches 22, the 7500AIBackup Battery Controls & Functions Answer On/OffVIP Alert on Indicator DateCaller’s Name Setting UP Security CodeLCD Contrast Security CodeSET CBT Code SundayVIP Alert on Time and DateNumber of Rings TS Toll SaverOutgoing Messages OGM OGM1 Recording OGM2 RecordingRecording Outgoing Messages OGM1 Playing OGM2 PlayingTo play your outgoing OGM 1 message At any time, press OGM1, the 7500AISetting the 7500AI to Answer Calls Basic OperationTo Turn the 7500AI On To Announce OnlyICM Recording MSG FullRecording Incoming Messages Caller hangs upUniden PrivatePayphone END of CallsConversation Screening Calls Recording a MemoMemo. The 7500AI beeps once, and the increases by one Call Timer WAY RecordingXX Messages TWO-WAY RecordingReviewing Calls Reviewing NEW CallsPause Calls with MessagesPlaying Messages Pause During Message PlaybackAdjusting the Volume Playing NEW Messages onlyReplaying or Skipping Messages While on Review VIP Display shows the VIP iconStoring a CID as a VIP Caller To view the VIP CID ListWaiting DialingPick UP Phone CallbackDeleting Calls and Messages Deleting CallsDeleting Messages Using Call Breakthrough CBT CBT AlertTo use the CBT code in a call Call your telephone number Changing the CBT CodeAutomatic 7500AI Switch On for Australian version only Remote OperationRemote Operation Call your telephoneUsing Remote Commands Remote OperationChanging the Remote Operation Security Code Care and Maintenance Troubleshooting Problem SuggestionWarranty Troubleshooting Warranty Resetting the 7500AIProcedure for Obtaining Performance of Warranty Clear Signal of What’s Ahead