Uniden 7500AI manual Safety Information, Read this Before Installation

Page 4

SAFETY INFORMATION

FOR YOUR SAFETY, PLEASE OBSERVE THE FOLLOWING:-

Never install telephone wiring during lightning storm.

Do not use your 7500AI unit near water or when wet.

Do not take apart or remove the screws (except battery cover screw) - there are no serviceable parts inside.

Make sure the line cord and AC Adaptor do not cause a trip hazard.

READ THIS BEFORE INSTALLATION

Your 7500AI conforms to Australian or New Zealand Telecommunications Authority Standards and you can connect it to most telephone lines. However, each device you connect to the phone line draws power from the phone line. We refer to this power draw as the device’s Ringer Equivalence Number, or REN. This number is on the label under the 7500AI.

If you are using more than one phone or other device on the line, add up all the RENs. If the total is more than three(3), your phone(s) may not ring and your 7500AI may not answer. If ringer operation is impaired, remove a device from the line.

NOTE: You must not connect your 7500AI to any of the following:

Coin operated systems

Party-line systems

Most electronic key phone systems

1

Image 4
Contents 7500AI Contents Warranty Remote OperationSafety Information Read this Before InstallationSafety Information Introduction Congratulations on the purchase of your 7500AI DigitalParts Checklist Splitter for New Zealand Splitter for AustraliaYour 7500AI’S Features Include Memory Backup 9V BatteryInstallation Selecting a LocationConnecting Power Memory TestMessage After the counter reaches 22, the 7500AIBackup Battery Controls & Functions Answer On/OffDate VIP Alert on IndicatorCaller’s Name Setting UP Security CodeLCD Contrast Security CodeSET CBT Code SundayVIP Alert on Time and DateTS Toll Saver Number of RingsOutgoing Messages OGM OGM2 Recording OGM1 RecordingRecording Outgoing Messages OGM1 Playing OGM2 PlayingTo play your outgoing OGM 1 message At any time, press OGM1, the 7500AISetting the 7500AI to Answer Calls Basic OperationTo Turn the 7500AI On To Announce OnlyICM Recording MSG FullRecording Incoming Messages Caller hangs upUniden PrivateEND of Calls PayphoneConversation Recording a Memo Screening CallsMemo. The 7500AI beeps once, and the increases by one Call Timer WAY RecordingXX Messages TWO-WAY RecordingReviewing Calls Reviewing NEW CallsPause Calls with MessagesPlaying Messages Pause During Message PlaybackPlaying NEW Messages only Adjusting the VolumeReplaying or Skipping Messages While on Review VIP Display shows the VIP iconStoring a CID as a VIP Caller To view the VIP CID ListWaiting DialingPick UP Phone CallbackDeleting Calls Deleting Calls and MessagesDeleting Messages Using Call Breakthrough CBT CBT AlertTo use the CBT code in a call Call your telephone number Changing the CBT CodeAutomatic 7500AI Switch On for Australian version only Remote OperationRemote Operation Call your telephoneUsing Remote Commands Remote OperationChanging the Remote Operation Security Code Care and Maintenance Troubleshooting Problem SuggestionWarranty Troubleshooting Warranty Resetting the 7500AIProcedure for Obtaining Performance of Warranty Clear Signal of What’s Ahead