Uniden 7500AI manual Number of Rings, TS Toll Saver, Outgoing Messages OGM

Page 16

SETTING UP

NUMBER OF RINGS

The 7500AI can be set to 2, 4 or 7 rings before it plays the OGM and receives the call. To set the ringer, move the ringer select switch to the desired position.

TS (TOLL SAVER)

The 7500AI has New Message Detection to avoid unnecessary toll charges when calling long distance to check your messages. To use this feature set the ringer select to TS. If there are new messages, the 7500AI will answer after 2 rings, otherwise it will answer after 4 rings. Thus, when checking messages you can hang up after 2 rings because the 7500AI has no new messages.

OUTGOING MESSAGES (OGM)

The 7500AI will not receive calls until at least one of the outgoing messages has been recorded.

•OGM 1 plays the message you recorded, and lets the caller leave a message of up to 60 seconds.

•OGM 2 (announcement only) plays the message you recorded, and hangs up without letting the caller leave a message. This is useful for announcing information about an upcoming event.

NOTE: Be sure the announcement clearly states that the caller cannot leave a message.

If the 7500AI memory becomes full, it will automatically switch from OGM 1 to OGM 2 and play that message for any new calls.

SETTING UP

13

Image 16

Contents 7500AI Contents Warranty Remote OperationSafety Information Read this Before InstallationSafety Information Introduction Congratulations on the purchase of your 7500AI DigitalParts Checklist Splitter for New Zealand Splitter for AustraliaYour 7500AI’S Features Include Memory Backup 9V BatteryInstallation Selecting a LocationConnecting Power Memory TestMessage After the counter reaches 22, the 7500AIBackup Battery Controls & Functions Answer On/OffDate VIP Alert on IndicatorCaller’s Name Setting UP Security CodeLCD Contrast Security CodeSET CBT Code SundayVIP Alert on Time and DateTS Toll Saver Number of RingsOutgoing Messages OGM OGM2 Recording OGM1 RecordingRecording Outgoing Messages OGM1 Playing OGM2 PlayingTo play your outgoing OGM 1 message At any time, press OGM1, the 7500AISetting the 7500AI to Answer Calls Basic OperationTo Turn the 7500AI On To Announce OnlyICM Recording MSG FullRecording Incoming Messages Caller hangs upUniden PrivateEND of Calls PayphoneConversation Recording a Memo Screening CallsMemo. The 7500AI beeps once, and the increases by one Call Timer WAY RecordingXX Messages TWO-WAY RecordingReviewing Calls Reviewing NEW CallsPause Calls with MessagesPlaying Messages Pause During Message PlaybackPlaying NEW Messages only Adjusting the VolumeReplaying or Skipping Messages While on Review VIP Display shows the VIP iconStoring a CID as a VIP Caller To view the VIP CID ListWaiting DialingPick UP Phone CallbackDeleting Calls Deleting Calls and MessagesDeleting Messages Using Call Breakthrough CBT CBT AlertTo use the CBT code in a call Call your telephone number Changing the CBT CodeAutomatic 7500AI Switch On for Australian version only Remote OperationRemote Operation Call your telephoneUsing Remote Commands Remote OperationChanging the Remote Operation Security Code Care and Maintenance Troubleshooting Problem SuggestionWarranty Troubleshooting Warranty Resetting the 7500AIProcedure for Obtaining Performance of Warranty Clear Signal of What’s Ahead