Uniden manual Memory Test, Message, Connecting Power, After the counter reaches 22, the 7500AI

Page 10

INSTALLATION

CONNECTING POWER

Use only the Uniden AC Adaptor supplied with this

Uniden 7500AI Digital Telephone Answering Machine.

1.Plug the AC Adaptor into the power socket at the rear of the 7500AI labelled “AC 9V 400mA”.

INSTALLATION

2. Then plug the other end into your mains socket.

When the power is first connected, the 7500AI beeps and the display shows a memory test counting from 00 to 22.

AM

CALL#

NEW

 

OGM1 OGM2

MEMORY TEST

After the counter reaches 22, the 7500AI

 

AM

CALL#

beeps and the display shows.

 

OGM1 OGM2

NEW

 

 

0 MESSAGE

NOTE: The display will have OGM1 OGM2 flashing to call the user’s attention to record an OGM. The battery icon will also be displayed if no battery is installed on your 7500AI.

7

Page 9 Page 11
Image 10
Page 9 Page 11
Contents 7500AI Contents Warranty Remote OperationSafety Information Read this Before InstallationSafety Information Introduction Congratulations on the purchase of your 7500AI Digital Parts Checklist Splitter for New Zealand Splitter for AustraliaYour 7500AI’S Features Include Memory Backup 9V BatteryInstallation Selecting a LocationMessage Connecting PowerMemory Test After the counter reaches 22, the 7500AIBackup Battery Controls & Functions Answer On/OffDate VIP Alert on IndicatorCaller’s Name LCD Contrast Setting UPSecurity Code Security CodeVIP Alert on SET CBT CodeSunday Time and DateTS Toll Saver Number of RingsOutgoing Messages OGM OGM2 Recording OGM1 RecordingRecording Outgoing Messages To play your outgoing OGM 1 message OGM1 PlayingOGM2 Playing At any time, press OGM1, the 7500AITo Turn the 7500AI On Setting the 7500AI to Answer CallsBasic Operation To Announce OnlyRecording Incoming Messages ICM RecordingMSG Full Caller hangs upUniden PrivateEND of Calls PayphoneConversation Recording a Memo Screening CallsMemo. The 7500AI beeps once, and the increases by one XX Messages Call TimerWAY Recording TWO-WAY RecordingReviewing Calls Reviewing NEW CallsPlaying Messages PauseCalls with Messages Pause During Message PlaybackPlaying NEW Messages only Adjusting the VolumeReplaying or Skipping Messages While on Review Storing a CID as a VIP Caller VIPDisplay shows the VIP icon To view the VIP CID ListPick UP Phone WaitingDialing CallbackDeleting Calls Deleting Calls and MessagesDeleting Messages To use the CBT code in a call Call your telephone number Using Call Breakthrough CBTCBT Alert Changing the CBT CodeRemote Operation Automatic 7500AI Switch On for Australian version onlyRemote Operation Call your telephoneUsing Remote Commands Remote OperationChanging the Remote Operation Security Code Care and Maintenance Troubleshooting Problem SuggestionWarranty Troubleshooting Warranty Resetting the 7500AIProcedure for Obtaining Performance of Warranty Clear Signal of What’s Ahead
Top Page Image Contents