Uniden 7500AI manual Using Call Breakthrough CBT, CBT Alert, Changing the CBT Code

BASIC OPERATION

BASIC OPERATION

USING CALL BREAKTHROUGH (CBT)

If you screen call, but want to make sure that you don’t miss calls from important people (like members of the family), you can provide these people with your CBT code. See code encoded while Setting CBT Code on

page 15-16.

CBT Alert

When a caller enters the CBT code, the 7500AI alerts you with loud beeps for 35 seconds. Then the 7500AI sounds two beeps every two seconds for 30 seconds, and one short beep every second for the last 5 seconds. To answer the call, pick up the handset. If you do not answer, the caller can leave a message after the outgoing message plays and a long beep sounds.

To use the CBT code in a call:

1.Call your telephone number

2.Once the OGM starts playing, enter the CBT code using the caller’s telephone keypad then the VIP alert will be heard on your 7500AI.

Changing the CBT Code

The CBT code is preset to 168, but you can change it by following the steps in Setting CBT the Code on page 15-16 of this owner’s manual.

NOTE: Be sure to set each digit within 8 seconds. Otherwise, you must start over from Step 1.

28