Panasonic PT-LC76U Connections, Projector position, Example of connecting to video equipments

Projector position

Top edge of screen

SH	Screen
	L
	H1

Bottom edge of screen

81.2 (3-3/16)

SW L

Screen

<Units: mm (inch)>

L:Projection distance SH: Image height SW:Image width

H1: Distance from center of lens to bottom edge of projected image

Connections

Notes on connections

BRead the instruction manual for each system component carefully before connecting it.

BTurn off the power supply for all components before making any connections.

BIf the cables necessary for connecting a component to the system are not included with the component

or available as an option, you may need to fashion a cable to suit the component concerned.		started
BIf there is a lot of jitter in the video signal which is input from the video source, the picture on the
screen may flicker. In such cases, it will be necessary to connect a TBC (time base corrector).
BRefer to the list on page 58 for details on compatible signals which can be
input to the projector.
		Getting
BOnly one audio system circuit is available for the AUDIO IN L-R jacks, so if you wish to
change the audio input source, you will need to remove and insert the appropriate plugs.
Example of connecting to video equipments
Computer for control use
	D-sub 15 (male) - BNC5 (male) adapter cable
	Red (connect to PR signal connector)
	Blue (connect to PB signal connector)
	Green (connect to Y signal connector)

Projection distances

4:3 Screen	Projection distance (L)		Height
size			position
	Wide	Telephoto
(diagonal)			(H1)
	(LW)	(LT)
0.84 m(33˝)		1.1 m(3´7˝)	0.08 m(3-1/8˝)
1.02 m(40˝)	1.2 m(3´11˝)	1.4 m(4´7˝)	0.09 m(3-17/32˝)
1.27 m(50˝)	1.5 m(4´11˝)	1.8 m(5´10˝)	0.11 m(4-5/16˝)
1.52 m(60˝)	1.8 m(5´10˝)	2.1 m(6´10˝)	0.14 m(5-1/2˝)
1.78 m(70˝)	2.1 m(6´10˝)	2.5 m(8´2˝)	0.16 m(6-9/32˝)
2.03 m(80˝)	2.4 m(7´10˝)	2.9 m(9´6˝)	0.18 m(7-1/16˝)
2.29 m(90˝)	2.8 m(9´2˝)	3.2 m(10´5˝)	0.20 m(7-27/32˝)
2.54 m(100˝)	3.0 m(9´10˝)	3.6 m(11´9˝)	0.22 m(8-21/32˝)
3.05 m(120˝)	3.7 m(12´1˝)	4.3 m(14´1˝)	0.26 m(10-7/32˝)
3.81 m(150˝)	4.6 m(15´1˝)	5.4 m(17´8˝)	0.33 m(12-31/32˝)
5.08 m(200˝)	6.1 m(20´)	7.3 m(23´11˝)	0.44 m(17-5/16˝)
6.35 m(250˝)	7.6 m(24´11˝)	9.1 m(29´10˝)	0.55 m(21-5/8˝)
7.62 m(300˝)	9.2 m(30´2˝)	11.0 m(36´1˝)	0.66 m(25-31/32˝)

NOTE:

BThe dimensions in the table above are approximate.

BIf you use the projection distance for the 16:9 screen, the 4:3 projection image overflows the screen at the top and bottom.

BFor details about projected image distances, refer to page 59.

DVD player

DIN 8-pin

(male)

DVD player Video deck

NOTE:

BIf the video signal source is connected using a cable with a BNC connector plug, use a BNC/RCA adapter (sold separately) to convert the cable end to an RCA plug-type jack.

BIf the signal cables are disconnected or if the power supply for the

computer or video deck is turned off while the digital zoom or index window functions are being used, these functions will be cancelled.

18-ENGLISH ENGLISH-19